Cabo HDMI PureLink FX-I350 10 m HDMI tipo A standard preto prateado

The PureLink FX-I350 10 m HDMI Type A cable is a hybrid active optical cable (AOC) that combines fiber and copper conductors to transmit uncompressed 4K UltraHD (2160p) video and digital audio at up to 60 Hz with an 18 Gbps HDMI 2.0 bandwidth. Designed for professional installations, the FX-I350 offers plug-and-play operation, full HDMI signal integrity with support for CEC, transparent EDID and HDCP, and an ultra-small bend radius for flexible routing. Pre-assembled with HDMI-A male connectors and a full-metal housing, the 10 m length provides a lightweight, low-attenuation connection without the need for external power.

Advantages

The FX-I350 uses HDMI 2.0 at 18 Gbps to deliver uncompromised 4K@60Hz video and supports full digital audio. Its hybrid design keeps AV signal transmission on fiber for long-distance, low-loss performance while copper conductors carry power and data lines such as the 5V HDMI line, enabling full CEC, EDID pass-through and HDCP compatibility. Connectors feature gold-plated contacts and a robust full-metal housing; the cable is EMI resistant, has low attenuation and requires no external power. The small outer diameter and minimal bend radius make it suitable for professional installations where space and flexibility matter.

Suitable for

• Connecting 4K TVs, projectors or professional displays over long distances
• AV installations in conference rooms, lecture halls and event venues
• Digital signage and rental/staging setups requiring reliable 24/7 operation
• Home theatre systems where long cable runs are needed without signal repeaters

Key specifications

• Length: 10 m
• HDMI version: 2.0 (18 Gbps)
• Resolution support: up to 4K / UltraHD (2160p) at 60 Hz
• Connectors: HDMI-A male to HDMI-A male (pre-assembled)
• Cable type: Hybrid fiber optic (AV) + copper (power/data)
• Outer diameter: Ø 4.5 mm
• Features: Gold-plated contacts, full-metal housing, EMI resistance, low attenuation, no external power required
• Maximum lossless transmission distance (product family): up to 100 m
• MPN / EAN: FX-I350-010 / 4251364713570

How to use

Identify the clearly marked transmitter and receiver ends and plug each HDMI-A connector into the corresponding HDMI ports on your source device and display. The cable supports plug-and-play operation; no external power, repeaters, or configuration are required for standard use. Ensure connectors are fully seated and avoid excessive bending at the connector strain-relief—maintain at least the specified minimum bend radius during routing. If using adapters, compatibility cannot be guaranteed and should be tested before final installation.

Recommendations

For best results in professional AV installations, choose the correct cable orientation (TX/RX), avoid tight bends below the minimum bending radius, and test EDID/HDCP compatibility with your specific equipment. Use pre-assembled lengths offered in the FX-I350 series to match installation distance requirements.