Cabo HDMI Vention AANBJ HDMI 2.1 48 Gbit/s 5 m, HDMI tipo A macho-macho, preto

Vention AANBJ is a 5 m HDMI 2.1 cable with HDMI Type A male connectors on both ends. It supports a maximum transmission bandwidth of 48 Gbit/s and is compatible with high-resolution video and audio standards including 8K@60Hz and 4K@120Hz. The cable carries 3D signals and Audio Return Channel (ARC) functionality, making it suitable for connecting TVs, monitors, projectors, game consoles and AV receivers in home and professional AV setups.

Advantages

The cable provides high data throughput (48 Gbit/s) for uncompressed high-resolution video and multi-channel audio. Its HDMI 2.1 specification ensures compatibility with Dynamic HDR, Dolby Vision and 3D content, while the standard Type A male connectors make installation straightforward on most consumer devices. The 5 m length offers flexibility for longer cable runs without intermediate adapters.

Suitable for

• Connecting 8K@60Hz or 4K@120Hz TVs and displays
• Hooking up game consoles to TVs or monitors
• Linking AV receivers and soundbars using ARC
• Connecting projectors for high-resolution video playback

When it may not be suitable

This cable is intended for devices that have HDMI Type A ports and support HDMI 2.1 features. It will not provide increased performance if the connected devices or source content are limited to older HDMI versions or lower resolutions/refresh rates. For installations requiring lengths significantly longer than 5 m without signal boosters or active repeaters, signal integrity may degrade.

Key specifications

• HDMI version: 2.1
• Maximum bandwidth: 48 Gbit/s
• Supported resolutions/refresh rates: up to 8K@60Hz and 4K@120Hz
• HDR support: Dynamic HDR, Dolby Vision
• Audio features: Audio Return Channel (ARC), 3D audio capable
• Connectors: HDMI Type A male — both ends
• Cable length: 5 m
• Colour: Black

How to use

Connect one HDMI Type A male end to the source device (such as a Blu-ray player, game console or media streamer) and the other end to the display device (TV, monitor or projector). If using ARC, plug the cable into the HDMI ARC port on the TV and the corresponding ARC-enabled port on the AV receiver or soundbar, then enable ARC/eARC in device settings if required. Ensure both source and display support the desired resolution and refresh rate; adjust settings on devices as needed.

What to consider before purchase

• Confirm both source and display have HDMI Type A ports and support HDMI 2.1 features you need
• Check desired resolution and refresh rate compatibility (8K@60Hz or 4K@120Hz)
• Consider cable length — 5 m is suitable for many setups but longer runs may need active solutions
• Ensure ARC/eARC support on your TV and audio device if you plan to use audio return functionality

Recommendations

For optimal performance, use the cable with HDMI 2.1-compatible sources and displays, verify device firmware is up to date, and avoid running the cable near strong electromagnetic interference sources. If you require runs longer than 5 m at full 48 Gbit/s bandwidth, consider an active HDMI solution or signal booster.