Cabo patch Equip Cat.6A S/FTP RJ-45 0,15 m vermelho

The Equip Cat.6A S/FTP Patch Cord is built from high-quality materials and tested to meet industry standards. It supports 10GBase-T and a data rate up to 10000 Mbit/s, with S/FTP shielding to reduce electromagnetic interference and preserve signal integrity for short-distance connections. The cable is 0.15 m long, uses RJ-45 connectors on both ends and comes in red.

Advantages

The Cat.6A S/FTP design provides improved bandwidth and a higher signal-to-noise margin compared with lower category cables, enabling reliable 10G performance in demanding network environments. Short length and robust RJ-45 connectors ensure low latency and minimal insertion loss for patching in racks and panels. S/FTP shielding minimizes crosstalk and external interference for more stable links.

Suitable for

• Short interconnects in server racks and patch panels
• 10GBase-T network connections over short distances
• Workstation-to-switch patching in data centers or offices
• Environments where reduced interference and organized cabling are required

Key specifications

• Brand: EQUIP
• Model / MPN: 606500
• EAN: 4015867237212
• Category: Cat.6A S/FTP patch cable
• Length: 0.15 m
• Connectors: RJ-45 to RJ-45
• Cabling technology: 10GBase-T
• Max data rate: 10000 Mbit/s
• Colour: Red
• Weight: 0.0124 kg

How to use

Plug one RJ-45 connector into the network device (switch, patch panel or NIC) and the other connector into the corresponding port. Ensure connectors are fully seated and routed to avoid sharp bends. Use the 0.15 m length for short patching runs where minimal slack is required. Verify link status on connected devices after installation.

Recommendations

For optimal performance, avoid tight bends and electromagnetic sources near the cable. Use this 0.15 m patch cord for short connections inside racks or patch panels rather than long-span runs; for longer distances select a cable with appropriate length and category rating.