Cabo ProXtend 4 pinos para 2×3 pinos M-F M42XM3F-003, 1 m, preto

ProXtend 4-Pin to 2×3-Pin M-F M42XM3F-003 is a 1 m black connector cable that splits a single 4-pin connection into two separate 3-pin outputs. Designed for simple distribution of power or signal from a 4-pin source to two 3-pin devices, the cable provides a compact, plug-and-play solution for cleaner cable routing and fast connection changes in audio/video setups and related equipment.

Advantages

The cable offers a straightforward, single-piece solution to convert a 4-pin feed into two 3-pin outputs without additional adapters. Its 1 m length balances reach and neat routing, while the black finish minimizes visual impact in equipment racks and media installations. The assembled connector ends allow immediate use without soldering or complex setup.

Suitable for

• Splitting a 4-pin power or signal line to feed two 3-pin devices
• Audio and video installations where a single 4-pin source must be distributed
• Equipment racks, DJ setups, or broadcast stations requiring compact cable routing
• Temporary connections for testing or troubleshooting of 3-pin devices from a 4-pin supply

Key specifications

• Cable type: 4-pin to 2×3-pin splitter cable
• Length: 1 meter
• Color: black
• Connector arrangement: one 4-pin male/female end to two 3-pin male/female ends (as supplied)
• Weight: approximately 0.02 kg

How to use

Connect the 4-pin end to the appropriate 4-pin source connector, then plug the two 3-pin ends into the target devices. Ensure connectors are aligned correctly before insertion to avoid bent pins. Use the cable for distribution of compatible power or signal lines only; verify that the electrical characteristics of the source and destinations match and that combined load does not exceed the source capability.

Recommendations

Route the cable to avoid sharp bends and high-tension points. Keep the splitter clear of heat sources and secure connections in racks or enclosures to prevent accidental disconnection. Inspect connectors periodically for wear or damage and replace the cable if any deterioration is observed.