Cabo SATA DeLOCK 82812 0,7 m SATA 7 pinos amarelo

The DeLOCK 82812 SATA cable is a 0.7 m internal SATA III cable with 7-pin SATA connectors at both ends in yellow. It complies with the SATA 6 Gb/s standard and is suitable for connecting internal storage devices such as HDDs, SSDs and controller cards. The SATA III interface is backwards compatible with earlier SATA versions; achieved transfer speed depends on the connected device and controller. Metal clips on the connectors provide additional snap-in retention, and when connected to a drive the cable is typically routed upwards.

Advantages

This SATA cable supports data transfer rates up to 6 Gb/s and is backwards compatible with previous SATA standards. With a length of 0.7 m it offers a balance between routing flexibility and tidy cable management inside PC chassis. The metal retention clips improve connector stability, and the yellow insulation makes the cable easy to identify when installing or maintaining internal components.

Suitable for

• Connecting internal 3.5" or 2.5" HDDs to a motherboard or controller card
• Connecting SATA SSDs inside desktop PCs
• Internal connections to SATA controller cards and optical drives

Key specifications

• Cable type: SATA III (SATA 6 Gb/s)
• Cable length: 0.7 m
• Connectors: SATA 7-pin to SATA 7-pin
• Colour: Yellow
• MPN: 82812
• EAN: 4043619828128

How to use

Connect one 7-pin SATA connector to the SATA port on the motherboard or controller card and the other connector to the SATA port on the storage device. Ensure the metal clips engage to secure the connection. Route the cable to avoid sharp bends and to maintain airflow within the PC case. The cable supports SATA III speeds when both host and device support SATA 6 Gb/s; otherwise the connection operates at the highest mutually supported SATA version.

Recommendations

For reliable operation, avoid excessive bending near the connector ends and keep the cable clear of cooling fans and moving parts. Use the 0.7 m length for internal routing within standard desktop cases to minimise cable slack and improve airflow.