Cabo SATA DeLOCK 84982 0,1 m SATA 7 pinos preto azul

This SATA cable by DELOCK (model 84982) is a 0.1 m SATA III internal cable with 7‑pin connectors on both ends, designed for connecting SATA devices such as hard disk drives, controller cards or flash memory within a computer. It supports the SATA III standard with data transfer rates up to 6 Gb/s and is backwards compatible with earlier SATA versions. The cable has a black and blue colour scheme and metal clips on the connectors to ensure a secure, audible connection. When attached to a hard drive, the cable is oriented so the connector leads to the left.

Advantages

The short 0.1 m length is suited for compact internal layouts and reduces cable clutter. Compliance with the SATA III standard enables up to 6 Gb/s throughput while maintaining backward compatibility with older SATA ports. Robust metal clips on both 7‑pin connectors provide a reliable, snap‑in fit to prevent accidental disconnection. The two‑tone black and blue design aids identification inside the case.

Suitable for

• Connecting 2.5" and 3.5" SATA hard drives to a motherboard or controller
• Linking SATA SSDs or flash storage to internal SATA ports
• Compact PC builds, small form factor systems and tight cable-routing scenarios

Key specifications

• Cable type: SATA III
• Cable length: 0.1 m
• Connector 1: SATA 7‑pin
• Connector 2: SATA 7‑pin
• Data transfer rate: up to 6 Gb/s
• Product colour: Black, Blue
• Manufacturer: DELOCK; MPN: 84982

How to use

Power off the system before connecting internal cables. Align a 7‑pin connector with the corresponding SATA port on the drive or motherboard and press until the metal clip clicks into place. When connecting to a hard drive, note that the cable will be oriented to the left. Ensure cables are routed to avoid sharp bends and do not place tension on the connectors. After installation, power on the system and verify the device is recognized by the BIOS/operating system.

Recommendations

Use this 0.1 m SATA III cable for short internal connections where minimal cable length is required; for longer routing or case-to-drive distances select an appropriately longer SATA cable to avoid strain on connectors.