Cabo telefónico ShiverPeaks BS70105 15 m preto

The ShiverPeaks BS70105 15m Black telephone cable provides a 15-metre connection between telephone equipment with a TAE (F) socket and devices using an RJ-11 plug. Designed for voice communication, this cable supports landline phones and telephony devices in home and office environments. Its black jacket and durable construction aim to deliver a stable, low-interference link for clear calls across a longer reach than standard short cords.

Advantages

This telephone cable combines a TAE (F) connector on one end and an RJ-11 connector on the other to ensure compatibility with many European wall sockets and standard telephones. The 15 m length allows flexible device placement without signal loss typical of very long or poor-quality cables. The cable’s outer sheath offers mechanical protection and a neat black finish that integrates with most interiors while reducing visible wear and dirt.

Suitable for

• Connecting a landline telephone to a wall socket with TAE (F) interface
• Extending the reach of telephone devices across rooms or office spaces
• Use with answering machines, fax devices, and basic telephony equipment that accept RJ-11
• Home and small office telephone installations where a longer cable run is needed

Key specifications

• Cable length: 15 metres
• Connector A: TAE (F)
• Connector B: RJ-11
• Color: Black
• Intended signal: Analogue telephone voice
• Construction: Jacketed telephone cable for indoor use

How to use

Plug the TAE (F) connector into the corresponding wall socket or base unit, and insert the RJ-11 plug into the telephone handset, base station, fax machine, or modem port. Ensure connectors are fully seated and that the cable is routed to avoid sharp bends or heavy compression that could damage the conductors. Test the connection by placing a call or checking dial tone; reposition connectors if necessary for a stable connection.

Recommendations

Avoid running the cable along high-traffic walkways where it can be tripped over or crushed. For best performance, keep the cable away from strong sources of electromagnetic interference such as large unshielded power cables or equipment with high current draw. For permanent installations, use cable clips or conduits to secure the run and prevent strain on the connectors.