Calha para cabos DeLOCK 20733 chão cinzento 70mm x 13mm x 1,5m

The DeLOCK 20733 cable duct is a floor-mounted PVC channel designed to route and protect cables, wires and small conduits. It measures 70 mm wide, 13 mm high and 1.5 m long in a neutral grey colour, allowing discreet installation along walls or across floors to reduce clutter and protect cables from dirt and damage.

Advantages

The PVC construction provides flexibility while maintaining shape and resistance to wear; the duct can be easily shortened with scissors to fit specific installation lengths. An adhesive strip on the underside allows quick and simple attachment to flat surfaces without additional tools.

Suitable for

• Routing antenna and HDMI cables
• Organising audio and power cables
• Protecting cables in offices, living rooms and conference areas

Key specifications

• Brand: DELOCK
• Model / MPN: 20733
• EAN: 4043619207336
• Material: Polyvinyl chloride (PVC)
• Colour: Grey
• Dimensions: 70 mm (W) × 13 mm (H) × 1.5 m (L)
• Mounting: Adhesive tape on bottom

How to use

Measure the route where the cable duct will be placed and cut the duct to the required length with scissors. Clean the mounting surface, remove the protective film from the adhesive strip and press the duct firmly onto the floor or base surface. Place the cables inside the channel, ensuring they fit within the 70 mm width and 13 mm height, then close or press down any cover if present to secure the cables.

Recommendations

For best adhesion, apply the duct to a clean, dry and smooth surface at room temperature. Avoid exposing the adhesive to heavy moisture or oily surfaces. Do not overload the duct beyond its internal capacity; route power and signal cables separately where possible to minimise interference.