Câmara IP Bullet Hikvision Pro Series ColorVu 4 MP varifocal motorizada 2,8–12 mm, rotação 360°, com fios, interior/exterior

Hikvision Pro Series ColorVu 4 MP motorized varifocal bullet camera delivers full-color imaging and detailed 4 MP resolution for both indoor and outdoor surveillance. Equipped with a 1/1.8" CMOS sensor and a 2.8–12 mm motorized lens, the camera provides a flexible horizontal viewing angle from 41.8° to 114.6° and vertical from 23.6° to 59.3°. Designed for continuous monitoring, it supports wired Ethernet connectivity, 360° rotation for flexible mounting orientations and ColorVu hybrid light to preserve color information in low-light conditions. Rugged sealing and impact-resistant housing allow use at entrances, perimeters and parking areas.

Advantages

The camera combines ColorVu technology with HikAI-ISP noise reduction and scene-adaptive WDR to maintain clear, colorful images in a variety of lighting conditions. Motorized varifocal optics simplify on-site focal adjustments and 360° rotation ensures correct framing after installation. Built-in smart hybrid lighting integrates IR and white lights with multiple supplemental modes to extend effective night coverage, while active strobe and audio alarm functions provide deterrence. Environmental protection with IP67 and IK10 ratings and anti-corrosion construction increases reliability for outdoor deployments.

Suitable for

• Perimeter surveillance around commercial or residential sites
• Parking lots and vehicle access control areas
• Building entrances and lobbies requiring color identification at night
• Areas requiring vandal-resistant, weatherproof fixed cameras

Key specifications

• Image sensor: 1/1.8" CMOS, 4 MP (2688 × 1520)
• Lens: Motorized varifocal 2.8–12 mm
• Horizontal viewing angle: 41.8°–114.6°; Vertical viewing angle: 23.6°–59.3°
• Rotation: 360° mechanical rotation for mounting flexibility
• Night illumination: ColorVu hybrid light with IR and white light, up to 60 m
• Audio: Built-in arrayed dual-microphone and two-way audio support
• Smart features: HikAI-ISP noise reduction, scene-adaptive WDR, person/vehicle classification
• Protection: IP67 dust/water resistance, IK10 vandal resistance, anti-corrosion construction
• Connectivity: Wired Ethernet LAN
• Weight: Approximately 1.55 kg

How to use

Mount the bullet camera on a wall or pole using compatible mounts, orient the housing and use the motorized varifocal lens to set the desired field of view remotely or on-site. Connect the camera to a PoE-capable switch or network video recorder via Ethernet to provide power and data. Configure imaging parameters such as exposure, WDR and ColorVu lighting modes in the recorder or camera web interface. Enable person/vehicle classification and set alarm triggers for strobe and audio deterrence according to the monitored area and recording policy.

Recommendations

For reliable color imaging at night, position the camera to avoid direct glare from on-site lighting and adjust hybrid light modes based on scene brightness. Regularly inspect seals and mounting hardware in corrosive environments and verify network and firmware updates to maintain classification accuracy and noise-reduction performance.