Câmara IP Bullet Hikvision Pro Series ColorVu 8 MP Smart Hybrid Light Fixed Mini, CMOS 1/1,8 polegadas, 108,8°x56,4°, montagem em parede, preto

The Hikvision Pro Series IP Bullet Camera ColorVu 8 MP Smart Hybrid Light Fixed Mini is a wired network camera designed for continuous colour surveillance in varied lighting conditions. It features an 8 MP 1/1.8" CMOS sensor with wide horizontal and vertical viewing angles, a compact fixed mini bullet form factor with wall mount, and a black finish. The camera supports powered installation and rotation adjustment, and is specified for detection, observation and recognition ranges suitable for perimeter and property protection in both indoor and outdoor settings.

Advantages

This camera provides full-colour imaging in low-light environments through ColorVu technology and integrates Smart Hybrid Light to combine infrared and white supplementary illumination. The 1/1.8" CMOS sensor delivers high-resolution 3840 × 2160 imaging for detailed scene capture, while wide-angle optics (approximately 108.8° horizontal and 56.4° vertical) cover broad areas with a single device. The mini bullet design with wall mount simplifies placement on facades or structures, and corrosion- and weather-resistant construction supports outdoor deployment.

Suitable for

• Perimeter monitoring of residential and commercial properties
• Entrance and façade surveillance where wide-angle coverage is required
• Outdoor driveway, parking area and courtyard observation
• Indoor areas that require high-resolution, wide-angle colour imaging

Key specifications

• Image sensor: 1/1.8" CMOS, 8 MP (3840 × 2160)
• Viewing angles: horizontal ~108.8°, vertical ~56.4°
• Optical format and lens: fixed mini bullet lens (fixed focal length as provided by manufacturer)
• Low-light colour technology: ColorVu with Smart Hybrid Light (combined IR and white light)
• Detection / observation / recognition ranges: detection up to 89 m, observation up to 35 m, recognition up to 17 m
• Mounting: wall mount compatible, 360° rotation support for alignment
• Connectivity: wired Ethernet LAN
• Environmental protection: suitable for indoor and outdoor use, water and dust resistant design
• Finish and weight: black finish, approximate weight 530 g

How to use

Install the camera on a stable wall surface using the included wall-mount points and ensure correct orientation with the supported rotation adjustments. Connect the camera to a local wired Ethernet network for power and data (PoE if supported by your system) and configure network settings via Hikvision-compatible management software or a network video recorder. Adjust the device field of view on-site to align the horizontal and vertical angles for the target area, and set Smart Hybrid Light modes according to ambient light to balance IR and white light illumination for colour imaging at night.

Recommendations

Position the camera at a height and angle that minimises obstructions and glare from nearby lights. For perimeter protection, choose locations that allow the specified detection and observation ranges to cover expected approaches. Regularly inspect seals and mounts when used outdoors and keep firmware updated via authorised Hikvision channels to maintain performance and security.