Conjunto de ferramentas pneumáticas Brüder Mannesmann 15033 1/2 polegadas chave de impacto, chave de roquete, martelo de cinzel, rebarbadora reta, 40 peças

This Brüder Mannesmann 15033 set bundles four pneumatic tools in one case, covering impact wrenching, ratcheting, chiselling and grinding without switching air lines between separate units. The 1/2" drive impact wrench and ratchet wrench share the same square drive, while the chisel hammer and die grinder bring demolition and surface prep into the same kit.

Highlights

• Four pneumatic tools: impact wrench, ratchet wrench, chisel hammer and die grinder
• 1/2 inch (12.5 mm) square drive on impact wrench and ratchet wrench
• Impact wrench delivers up to 310 Nm torque with 4 speed settings (3 forward, 1 reverse)
• Chisel hammer operates at 4500 blows per minute with 10 mm chisel shank
• Die grinder runs at 20000 rpm with 6 mm shank grinding stones
• 40-piece set includes sockets, chisels, grinding stones, quick couplers, oiler and hex key
• Stored in a robust plastic case

In daily use

All tools are rated for 6.3 bar (90 psi) operating pressure and connect via a 1/4 inch air inlet. Average air consumption is 113 l/min, so a compressor with sufficient flow is required. The impact wrench and ratchet wrench are reversible, and the impact wrench offers three forward speeds plus reverse. The chisel hammer accepts 10 mm shank chisels, while the die grinder takes 6 mm shank grinding stones. The set includes quick couplers and an oiler for maintenance.

Full specifications

• Tool type: Pneumatic tool set
• Number of tools: 4
• Drive size (impact wrench/ratchet): 1/2 inch (12.5 mm)
• Operating pressure: 6.3 bar (90 psi)
• Max. torque (impact wrench): 310 Nm
• No-load speed (impact wrench): 7000 rpm
• No-load speed (ratchet wrench): 150 rpm
• No-load speed (die grinder): 20000 rpm
• Blows per minute (chisel hammer): 4500 bpm
• Air consumption (average): 113 l/min
• Air inlet connection: 1/4 inch
• Recommended hose diameter: 10 mm (3/8 inch)
• Chisel shank diameter: 10 mm
• Grinding stone shank diameter: 6 mm
• Reversible function: Yes (impact wrench, ratchet wrench)
• Speed settings (impact wrench): 4 (3 forward, 1 reverse)
• Housing material: Aluminum / Composite
• Included accessories: Impact sockets, chisel bits, grinding stones, quick couplers, oiler, hex key
• Total pieces in set: 40
• Storage: Robust plastic case

Final note

The 40-piece set consolidates four air tools into one case, reducing the need for multiple separate purchases.