CoreParts MMI9915/16GB módulo de memória 1 x 16 GB DDR3 240-Pin DIMM

The CoreParts MMI9915/16GB is a 16GB DDR3 memory module running at 1866 MHz, intended for use in PCs and servers. It is a single-module design that simplifies installation and is compatible with systems supporting DDR3 memory. The module comes in green and is manufactured by MicroMemory to provide an alternative to original RAM modules using original chip sets.

Advantages

This 16GB DDR3 1866MHz module offers increased memory capacity and a higher clock speed compared with lower-frequency DDR3 modules, while maintaining compatibility with systems that accept DDR3 DIMMs. The single-module format makes it easy to install into an available memory slot. The module uses original chip sets from certified suppliers to match the performance of original memory modules.

Suitable for

• Desktop PCs requiring additional DDR3 memory
• Servers that support single-module DDR3 upgrades
• System upgrades where a 16GB DDR3 1866MHz module fits existing configuration

Key specifications

• Internal memory: 16 GB
• Memory type: DDR3
• Clock speed: 1866 MHz
• Module layout: single module
• Colour: Green
• Brand: MicroMemory
• MPN: MMI9915/16GB
• EAN: 5711783483038
• Weight: 0.01 kg

How to use

Power off the system and disconnect it from the mains. Open the case and locate an empty compatible DDR3 DIMM slot. Align the module with the slot keyed notch and press firmly on both ends until the retention clips snap into place. Close the case, reconnect power and start the system. Verify that the BIOS/UEFI recognises the new 16GB module and that the operating system detects the increased memory.

Recommendations

Install the module in a matched pair or according to your motherboard manual when using dual-channel configurations. Ensure the motherboard supports DDR3 1866 MHz and 16GB module capacity before installation. Handle the memory module by its edges and use an anti-static wrist strap or take anti-static precautions.