Disco de corte KWB 711833 para tubo, chapa, aço inoxidável

Cutting disc KWB 711833 is an extra-thin abrasive wheel available in diameters 115 mm x 1.0 mm, 125 mm x 1.0 mm and 230 mm x 1.9 mm, designed for precise cutting of stainless steel, sheet metal and steel pipes. The disc has a bore diameter of 22.23 mm and is intended for use in angle grinders with spindle lock and a maximum peripheral speed of 80 m/s. It conforms to EN 12413 safety requirements.

Advantages

The extra-thin design provides clean, narrow cuts with reduced material loss and lower burr formation. Compatibility with standard 22.23 mm disc holders and the specified peripheral speed ensures safe operation in suitable angle grinders. The discs are suitable for stainless steel, sheet metal and steel pipes, delivering consistent cutting performance for metalworking tasks.

Suitable for

Key specifications

How to use

Mount the cutting disc on an angle grinder with a matching 22.23 mm disc holder and engage the spindle lock to secure the disc. Verify the grinder's maximum peripheral speed does not exceed 80 m/s. Hold the tool firmly, align the disc with the cutting line and apply steady, even pressure while letting the disc do the cutting. Avoid side pressure and twisting motions to prevent disc damage. Allow the disc to stop completely before setting the tool down.

Recommendations

Use appropriate personal protective equipment such as safety glasses, hearing protection and gloves. Ensure workpieces are secured and remove combustible materials from the work area. Replace discs that show cracks, deformation or excessive wear. Follow the angle grinder manufacturer's safety instructions and the EN 12413 standard.