Disparador de flash Godox X2T-S para Sony — controlo remoto TTL 2,4 GHz, multigrupo, suporte HSS

Godox X2T-S is a dedicated 2.4 GHz wireless flash transmitter designed for Sony cameras. It mounts on the camera hot shoe and provides TTL metering, multi-group control and high-speed sync (HSS) support to trigger and manage off-camera Godox flashes and compatible receivers. The unit simplifies remote flash operation by allowing on-camera adjustment of flash mode, output and group assignments, helping photographers work faster when shooting portraits, events or studio setups.

Advantages

The transmitter supports reliable 2.4 GHz communication with multi-group control and TTL functionality, enabling automatic flash exposure while preserving manual override for creative control. Built-in high-speed sync compatibility allows synchronization at shutter speeds beyond the camera's standard flash sync, and the compact hot-shoe form factor keeps the control interface close to the camera for quick adjustments. The X2T-S also provides channel selection and grouping options to minimize interference in multi-flash environments.

Suitable for

• Portrait and fashion photography with off-camera lighting
• Event and wedding coverage requiring quick group adjustments
• Studio setups where multiple flash groups need coordinated control
• Outdoor shooting using high-speed sync to freeze motion

Key specifications

• Wireless frequency: 2.4 GHz for stable remote triggering
• Flash control modes: TTL and Manual
• High-speed sync (HSS): supported for shutter speeds above standard sync
• Multi-group operation: control of multiple flash groups from the transmitter
• Mount type: camera hot shoe installation for Sony cameras
• On-device controls: settings for channel, group and output adjustment

How to use

Attach the Godox X2T-S to your Sony camera hot shoe and power it on. Set the transmitter and all remote flashes or receivers to the same wireless channel, then assign groups as needed. Choose TTL for automatic exposure or switch to Manual for fixed output control. Use the transmitter's controls to adjust group power, flash mode and channel selection. When using HSS, enable high-speed sync on both the transmitter and compatible flash units and select an appropriate shutter speed for the effect you want.

Recommendations

For consistent results, verify firmware compatibility between the transmitter and your flash units, set distinct channels to avoid interference in crowded environments, and test TTL exposures before critical shoots. When precise lighting ratios are required, use manual mode to fine-tune output levels per group and keep spare batteries available for extended sessions.