EHA Ponte de cabos cinzento 6,2 x 3 m (44700) – Proteção de cabos de chão em PVC flexível, 2 canais, autoadesiva

Most cable protectors are rigid, bulky, and a hassle to install, but this EHA cable bridge takes a different approach: it's a low-profile, highly flexible PVC strip that you simply unroll and stick down. The pre-applied adhesive tape grips smooth indoor floors instantly, so there's no need for screws, drilling, or heavy rubber ramps. With two internal channels, each roughly 10 x 10 mm, it neatly routes network or power cables out of harm's way while the ramped edges let trolleys, office chairs, and foot traffic roll over without jolting. Because the material is cuttable, you can trim it to the exact length you need for desks, doorways, or event spaces.

Highlights

• Flexible PVC construction bends around corners and uneven floors without kinking.
• Self-adhesive backing: peel off the protective film and press into place – no tools required.
• Two cable channels keep up to four thin cables organised and separated.
• Low 12 mm profile with sloped sides reduces tripping hazards while allowing smooth crossings.
• Cut to size with scissors or a knife for a custom fit in any room.

In daily use

Picture a home office where the router sits across the room from your desk. Running an Ethernet cable along the skirting board leaves a visible trip hazard and gets kicked constantly. With this bridge, you press the strip over the cable run, and it disappears into a neat grey ramp. The self-extinguishing PVC means it won't fuel a fire, and the -20°C to +60°C temperature range keeps it stable in most indoor environments. Cleanup is simple: just wipe with a damp cloth. If you ever need to reposition it, the adhesive is strong but can be lifted carefully and re-applied on clean surfaces.

Full specifications

• Product type: Cable protector / cable bridge
• Material: Flexible PVC (polyvinyl chloride)
• Colour: Grey
• Length: 3000 mm (3 m)
• Overall width: 62 mm
• Overall height: 12 mm
• Number of channels: 2
• Channel dimensions (each): approx. 10 x 10 mm (W x H)
• Mounting type: Floor-standing, self-adhesive
• Adhesive: Pre-applied adhesive tape
• Application environment: Indoor
• Protection against: Tripping hazards, cable damage from foot traffic
• Cuttable: Yes
• Flexibility: High
• Temperature resistance: -20°C to +60°C
• Fire resistance: Self-extinguishing
• Max. cable capacity: Up to 2 standard network cables per channel
• Design features: Low profile, ramped edges for easy access

Final note

If you need a quick, clean way to protect cables across a walkway without permanent installation, this EHA bridge delivers reliable performance in a slim, unobtrusive package.