Estação de carregamento NRGkick 32A Pure com GSM, GPS, SIM, cabo de 7,5 m, WLAN

NRGkick 32A Pure with GSM, GPS, SIM, 7.5 m cable and WLAN is a portable AC charging station for electric vehicles that provides up to 32A charging current. The device integrates wireless connectivity (GSM and WLAN), GPS for location reporting and a SIM-compatible interface for remote communication. The permanently attached 7.5 m cable allows flexible vehicle positioning at home, workplace or temporary parking locations while supporting regulated AC charging suitable for a wide range of EVs.

Advantages

NRGkick 32A Pure combines high charging current with multiple connectivity options in a compact, portable housing. Integrated GSM and WLAN enable remote monitoring and control, while GPS provides location data for fleet management or personal tracking. The long attached cable reduces the need for exact parking alignment and simplifies use in varied parking situations. The device is designed for straightforward installation and user operation, offering a balance of performance and mobility for everyday charging needs.

Suitable for

• Home charging where a long cable and portable unit are required
• Workplace charging for employees or visitors without fixed infrastructure
• Mobile charging for technicians, fleet vehicles or temporary sites
• Remote monitoring and fleet management that require GSM, GPS and WLAN connectivity

Key specifications

• Maximum charging current: 32 A (single-phase or three-phase depending on local wiring and unit configuration)
• Connectivity: integrated GSM module, WLAN (Wi‑Fi) support and SIM-compatible interface
• Location: GPS receiver for position reporting
• Attached cable length: 7.5 m
• Cable connector: Type 2 charging plug (suitable for most European EVs)
• Mounting: portable unit with options for temporary mounting or stationary installation

How to use

Connect the NRGkick 32A Pure to a compatible electrical supply according to local wiring regulations and the unit’s configuration. Plug the Type 2 connector into the vehicle charging inlet and confirm that the vehicle and charger establish communication. Use the onboard connectivity (WLAN or GSM with SIM) to register the device with the provider or management platform if remote monitoring or location services are required. Monitor charging status through the vehicle dashboard or the supported remote interface and disconnect the connector after charging completion.

Recommendations

Ensure the supply circuit and protective devices (RCD/MCB) are appropriate for 32 A charging and that installation complies with local electrical codes. Use the integrated connectivity for firmware updates and status monitoring, and park the vehicle so the 7.5 m cable can reach the inlet without excessive strain. For fleet applications, verify GPS and SIM settings with your management system to enable accurate tracking and communications.