eSUN PLA+ Filamento 1,75mm Verde azeitona 1kg Refill PLA+175O-OG1R1

PLA+ filament in olive green, 1.75mm diameter, 1kg refill spool-less coil. High toughness and low shrinkage for reliable FDM printing.

Advantages

eSUN PLA+ offers enhanced mechanical properties compared to standard PLA, with high toughness, low shrinkage, and no warping. It prints with low odor and is biodegradable. The filament is vacuum sealed to maintain low moisture absorption, ensuring consistent printing performance.

Suitable for

• FDM 3D printers with 1.75mm filament compatibility
• Functional prototypes requiring higher impact resistance
• Educational and hobbyist projects
• Models needing a matte olive green finish

Key specifications

• Material: eSUN PLA+ (Polylactic Acid Plus)
• Diameter: 1.75 mm (±0.03 mm tolerance)
• Net weight: 1 kg (refill, spool-less coil)
• Colour: Olive Green
• Recommended print temperature: 210-230°C
• Recommended bed temperature: 60-80°C
• Tensile strength: 52 MPa
• Elongation at break: 29%
• Melt flow index: 2.5 g/10min (190°C, 2.16kg)
• Density: 1.24 g/cm³
• Packaging: Vacuum sealed with desiccant

Recommendations

Store in a dry, cool place. Use a filament dryer if moisture absorption is suspected. For best results, use a direct drive extruder or a well-tuned Bowden setup. Print with a heated bed at 60-80°C and apply an adhesive if needed.