Exaustor semi-encastrado Electrolux LFP226S, 598 mm, 330 m³/h, filtro de gordura de alumínio, 3 velocidades

The Electrolux LFP226S is a semi built-in (pull-out) extractor hood designed for integration into kitchen cabinetry. It offers a maximum extraction power of 330 m³/h and supports both ducted and recirculating operation. The unit is finished in grey and comes with an aluminium grease filter and two LED bulbs for work surface back lighting. The hood is controlled via push buttons, has an annual energy consumption of 52 kWh and operates on 220–240 V AC. The fluid dynamic efficiency class is D and the overall declared energy efficiency corresponds to class C.

Advantages

The Electrolux LFP226S combines a compact 598 mm width and 284 mm depth for a discreet semi built-in installation while providing relatively high extraction capacity for its size. The aluminium grease filter is washable and suitable for regular maintenance, and LED lighting provides efficient illumination with low energy use. Button controls offer straightforward operation without complex menus. The unit supports both ducted and recirculating setups, making it adaptable to different kitchen layouts.

Suitable for

• Small to medium domestic kitchens where a pull-out, semi built-in hood is required
• Kitchens with limited cabinet depth or where a compact extractor is preferred
• Installations needing the option of ducted or recirculating ventilation

Key specifications

• Width: 598 mm
• Depth: 284 mm
• Maximum extraction power: 330 m³/h
• Noise level (measured): 64 dB
• Type: Semi built-in (pull out)
• Grease filter: Aluminium, washable
• Energy efficiency class: C
• Fluid dynamic efficiency class: D
• Control type: Buttons
• Lighting: 2 × LED bulbs
• Annual energy consumption: 52 kWh
• Operating voltage: 220–240 V AC
• Colour: Grey

How to use

Install the Electrolux LFP226S into a compatible kitchen cabinet according to the manufacturer’s installation guidelines, ensuring proper clearance and either a duct or recirculation kit as required. Use the push buttons to switch the hood on and select the needed extraction level; operate the LED lights independently as needed to illuminate the cooking surface. Clean the aluminium grease filter regularly by removing it and washing according to the instructions; replace or clean any charcoal filter if the unit is used in recirculating mode.

Recommendations

For optimal performance, run the extractor at a moderate setting during cooking and switch to a higher extraction level for tasks that generate strong odours or large amounts of steam. Maintain the aluminium grease filter with periodic washing and check seals and ducting (if fitted) annually to preserve airflow and energy efficiency.