Filamento para impressão 3D Creality PLA dourado 1 kg — filamento de polilactida para impressoras FDM

Creality PLA Gold 1 kg is a polylactic acid (PLA) filament designed for FDM/FFF desktop 3D printers. This single-spool filament in a metallic gold shade is intended for general-purpose prototyping, decorative objects and household items. It is compatible with standard 1.75 mm filament systems where PLA is supported and offers the characteristic ease of printing and low tendency to warp typical for PLA materials.

Advantages

The filament provides consistent extrusion and good layer adhesion, which supports dimensional accuracy and surface finish on printed parts. Its gold color delivers an attractive metallic appearance suitable for decorative prints without special post-processing. The PLA formulation enables printing at moderate nozzle temperatures and does not require a heated chamber, reducing setup complexity for desktop printers.

Suitable for

• Prototyping of non-functional or lightly stressed parts
• Decorative models, figurines and display pieces
• Household items and organizers with aesthetic finish
• Cosmetic or visual components where metallic gold color is desired

Key specifications

• Material: Polylactic acid (PLA)
• Color: Gold (metallic appearance)
• Net weight: 1 kg spool
• Diameter: 1.75 mm nominal (compatible with standard 1.75 mm systems)
• Recommended printing: FDM/FFF desktop 3D printers
• Printing characteristics: Low warp, easy to print

How to use

Load the 1.75 mm spool into a compatible FDM/FFF printer. Set nozzle temperature according to your printer and PLA filament manufacturer's guidance—typical PLA nozzle temperatures are moderate; adjust flow and retraction settings to match your printer and desired surface quality. A heated bed is optional for PLA; if used, set a low bed temperature or use blue tape/PEI sheet for adhesion. Print at suitable layer heights for your model to balance print speed and detail. After printing, allow parts to cool before removal to avoid deformation.

Recommendations

Store the filament in a dry environment and use desiccant when not in use to minimize moisture absorption. For best results, calibrate extrusion multiplier and retraction for your printer and test with small samples before printing final parts. Avoid prolonged exposure to high temperatures or direct sunlight to preserve filament color and mechanical properties.