Filamento para impressão 3D GEMBIRD ABS 1,75 mm vermelho 1 kg

GEMBIRD ABS 3D printing filament 1.75 mm Red 1 kg is a spool of ABS thermoplastic designed for use in filament extrusion 3D printers. The filament has a 1.75 mm diameter and comes in a 1 kg spool in red. It is formulated for higher-speed printing and improved melting that supports fast extrusion systems and CoreXY motion platforms. The material offers high strength and good toughness while maintaining relatively low density for lighter large-volume parts. The filament is compatible with a wide range of printers that accept ABS and is suitable for functional prototypes, mechanical components and durable models when printed with appropriate ABS settings and a heated bed.

Advantages

This GEMBIRD ABS filament is optimised for fast printers and is compatible with systems such as Bambu Lab, Creality K1(max), FF 5M(PRO) and Voron, and fits Bambu Labs Automatic Material System. Its formulation improves melt flow for higher speed printing modes, while retaining impact resistance and toughness expected from ABS. The low density of the material reduces part weight for larger prints. The spool format and universal compatibility make it suitable for use across different brands of 1.75 mm extrusion printers.

Suitable for

Key specifications

How to use

Load the 1.75 mm GEMBIRD ABS filament onto the spool holder or into the printer's filament system (for example Bambu Labs AMS) and feed it into the extruder according to your printer's loading procedure. Use a heated bed and set printing temperatures appropriate for ABS—typical nozzle temperatures range higher than PLA and depend on your printer and slicer profile. Configure retraction, cooling and enclosure settings to reduce warping and layer separation; for best results use an enclosed build chamber or controlled ambient temperature. Calibrate extrusion multiplier and print speed for high-speed modes while monitoring first layers and adhesion.

Recommendations

Recommended starting settings: nozzle 230–260 °C, heated bed 80–110 °C, reduced part cooling or moderate fan use, use brim or raft for improved adhesion, and enable an enclosure if available. Adjust speeds and flow to match your printer capability when using sport or ludicrous high-speed modes. Store the spool in a dry environment or sealed bag with desiccant to preserve filament quality.