Filamento PLA para impressora 3D Flashforge HS 1,75 mm vermelho bombeiro 201°C 1 kg

Flashforge HS PLA 1.75 mm filament in Fire Engine Red is a 1 kg spool of biodegradable thermoplastic designed for FDM/FFF 3D printers that accept 1.75 mm PLA. The filament offers good dimensional stability, consistent diameter tolerance and predictable layer adhesion at the recommended extrusion temperature of 201°C. It is intended for general prototyping, hobby models and detailed prints where ease of printing and surface quality are important.

Advantages

This PLA filament provides reliable feeding and low-warp performance, enabling fine detail and accurate dimensions on printed parts. The Fire Engine Red color offers uniform pigmentation across the spool for consistent color in multi-part prints. The recommended extrusion temperature of 201°C helps balance layer bonding and surface finish while keeping stringing and oozing to a minimum on many printers. As a biodegradable thermoplastic, it is easier to handle and store compared with some specialty materials.

Suitable for

• Rapid prototyping and functional mock-ups
• Hobby models, miniatures and figurines
• Detailed parts requiring good surface finish and dimensional accuracy
• Educational projects and classroom 3D printing

Key specifications

• Material: PLA (polylactic acid), biodegradable thermoplastic
• Diameter: 1.75 mm nominal
• Spool weight: 1 kg net filament
• Recommended extrusion temperature: 201°C
• Color: Fire Engine Red (uniform pigmentation)
• Compatibility: FDM/FFF printers accepting 1.75 mm PLA filament

How to use

Load the 1.75 mm Flashforge HS PLA filament into a compatible FDM/FFF 3D printer according to the printer manufacturer's loading procedure. Set the nozzle temperature to approximately 201°C and adjust bed temperature and adhesion method based on your printer and model geometry; many prints work well on an unheated or mildly heated bed with blue painter's tape, PEI or a light glue stick layer. Calibrate extrusion multiplier and retraction settings to reduce stringing and ensure dimensional accuracy before printing critical parts.

Recommendations

Store the filament in a dry environment or sealed container with desiccant to prevent moisture uptake. For best results, perform a small test print when changing spool or printer settings. If stringing or poor layer adhesion appears, adjust retraction distance, print temperature in 2–5°C increments, and cooling fan speed to optimize surface finish and mechanical properties.