Ripjaws V 16GB DDR4-2666Mhz, 16 GB, 2 x 8 GB, DDR4, 2666 MHz, 288-pin DIMM, prateado

The G.Skill Ripjaws V DDR4 16GB 2666MHz memory module is a dual-channel kit consisting of two 8GB 288-pin DIMMs designed for desktop PCs and compatible servers. With a rated clock speed of 2666 MHz and CAS latency 15, this DDR4 module delivers balanced performance for everyday computing, multitasking and light content creation. The modules operate at a low DDR4 voltage and feature a silver heatspreader that complements modern system builds while maintaining compatibility with most large CPU coolers due to a standard module height.

Advantages

This Ripjaws V kit combines a moderate 2666 MHz frequency with CL15 timing to provide stable, responsive system memory for general-purpose and performance-oriented use. The dual-module configuration enables dual-channel operation for increased memory bandwidth compared with single-module setups. The silver heatspreader provides passive thermal dissipation while keeping a low profile suitable for many aftermarket coolers. Designed and validated by the manufacturer for compatibility across common motherboards, the kit supports XMP profiles for straightforward configuration.

Suitable for

• Upgrading a desktop system to 16 GB total RAM for smoother multitasking
• Dual-channel configurations for improved application and system responsiveness
• Mainstream gaming rigs aiming for balanced performance without extreme overclocking
• Workstations performing web browsing, office applications, and light photo/video editing

Key specifications

• Capacity: 16 GB (2×8 GB)
• Memory type: DDR4
• Clock speed: 2666 MHz
• CAS latency: 15
• Form factor: 288-pin DIMM
• Operating voltage: 1.2 V
• Module colour: Silver
• Module height: standard low-profile height suitable for most CPU coolers

How to use

Power down the PC and disconnect the power cable before installing memory modules. Open the system case, locate the motherboard DIMM slots and consult the motherboard manual to identify the recommended slots for dual-channel operation. Align the notch on each 288-pin DIMM with the slot key, press firmly and evenly until the module latches click into place. Reconnect power, enter the system BIOS/UEFI to confirm the memory is detected and, if desired, enable the appropriate XMP profile to set the advertised frequency and timings automatically.

Recommendations

Install the modules as a matched pair in the motherboard slots designated for dual-channel mode; ensure the system BIOS is updated to the latest version for best compatibility. When planning upgrades, verify motherboard support for total capacity and memory frequency. Avoid mixing modules with significantly different specifications to maintain system stability.