Injetor PoE DeLOCK 10 Gigabit 802.3at 30W

The DeLOCK PoE Injector 10 Gigabit 802.3at supplies power and data over a single network cable to PoE-enabled devices such as IP cameras or PoE splitters. Installed between a network switch and a powered device (PD), the injector delivers up to 30 W of power while supporting Ethernet data rates up to 10 Gbps. Its compact black plastic housing and integrated wall-mounting option allow space-saving indoor installation.

Advantages

The injector supports the 802.3at (PoE+) standard and provides up to 30 watts, enabling connection of higher-power devices. It supports 10 Gbps Ethernet throughput for high-bandwidth applications. The unit features LED indicators for PoE status and comes with AC power cables for immediate use. Its compact dimensions and wall-mount capability simplify installation in constrained spaces.

Suitable for

• PoE-enabled IP security cameras
• PoE splitters and extenders
• Network devices requiring up to 30 W and 10 Gbps data
• Indoor installations with limited space

Key specifications

• Standard: IEEE 802.3at (PoE+)
• Maximum power output: 30 W
• Data rate: up to 10 Gbps
• Input voltage: 100–240 V AC
• Housing: black plastic
• Dimensions: 145 x 61 x 39 mm
• Includes: AC power cables, LED PoE status indicators
• Brand: DELOCK, MPN: 87766, EAN: 4043619877669

How to use

Connect the injector’s data input to your network switch and connect the PoE output to the PoE-enabled device using a suitable Ethernet cable. Plug the included AC cable into a mains outlet to power the injector. Verify PoE operation via the LED indicators and confirm that the connected device receives power and network connectivity. Ensure the connected device’s power requirement does not exceed 30 W.

Recommendations

Use Cat5e or higher-rated Ethernet cables for reliable 10 Gbps operation and ensure the injector is installed indoors in a dry, ventilated location. Check device compatibility with IEEE 802.3at to prevent power mismatch. If mounting on a wall, secure the injector using the integrated mounting points and avoid obstructing ventilation openings.