Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Interruptor de corte de bateria IWH 100A para separar a bateria do veículo do sistema elétrico

Interruptor de corte de bateria IWH 100A para separar a bateria do veículo do sistema elétrico
Interruptor de corte de bateria IWH 100A para separar a bateria do veículo do sistema elétrico
27,43 €
Battery disconnect switch IWH 100A for isolating vehicle battery from electrical system is a manual rotary switch designed to interrupt the 12V battery feed to a vehicle or equipment electrical system. Rated for continuous current up to 100 A, it provides a safe and simple method to disconnect the b... Ler mais
Stock 10 Código 2237416 Marca IWH Modelo 019026 Garantia 2 anos

Envios e devoluções

Entrega prevista Sexta-feira, Outubro 23
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

Battery disconnect switch IWH 100A for isolating vehicle battery from electrical system is a manual rotary switch designed to interrupt the 12V battery feed to a vehicle or equipment electrical system. Rated for continuous current up to 100 A, it provides a safe and simple method to disconnect the battery without removing cable terminals. The switch is intended to reduce parasitic drain, prevent accidental shorts during maintenance, and offer an added layer of security while the vehicle is stored or transported.

Advantages

The IWH 100A battery disconnect switch offers a compact, robust solution for isolating the battery quickly and reliably. Its manual operation requires no tools, enabling fast switching between connected and disconnected states. By breaking the main battery feed, the device reduces parasitic current draw and minimizes the risk of electrical faults during repair or long-term storage. The construction is suitable for automotive and light equipment environments where consistent 12V isolation is needed.

Suitable for

Key specifications

How to use

Install the switch in line with the battery positive cable following standard automotive wiring practices, ensuring secure bolted connections and corrosion-protected terminals. To disconnect the battery, rotate the control to the off position until the feed is open; to restore power, rotate back to the on position ensuring contacts are fully engaged. Always switch off loads and follow vehicle manufacturer safety precautions before operating the device. Verify correct installation with a multimeter if necessary.

Recommendations

Regularly inspect terminal connections for tightness and corrosion. Use appropriate cable gauges and torque values compatible with a 100 A circuit. Do not exceed the rated continuous current and avoid using the switch as a frequent load switch under heavy currents; it is intended primarily for isolation during storage, maintenance, and emergency shutoff.

Destaques principais
  • Vehicle storage and seasonal lay-up to prevent battery drain
  • Maintenance and repair work requiring a safe electrical isolation point
  • Theft deterrence by isolating the battery feed
  • Use on trailers, RVs, agricultural machines, and light commercial vehicles
  • Nominal system voltage: 12 V DC
  • Rated continuous current: 100 A
  • Type of operation: manual rotary on/off
  • Connection style: bolt terminals for secure cable attachment
  • Function: complete battery feed isolation (open/closed positions)
  • Typical mounting: panel or bracket installation in engine bay or cabin
Histórico de preços nos últimos 6 meses
Interruptor de corte de bateria IWH 100A para separar a bateria do veículo do sistema elétrico
Atual
27,43 €
Mais baixo
26,87 €
Mais alto
27,43 €
Variação 24 h
+0,49 €   +2%
Semana
+0,55 €   +2%
Mês
—   
Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.