IVT 920033 Booster de tensão de carga 12 V 30 A

Unlike standard battery chargers that stop at a fixed voltage, the IVT 920033 boosts the alternator voltage to the exact level your auxiliary battery needs, ensuring a full charge even on long cable runs or with voltage drops. This 30 A unit supports LiFePO4, Gel, AGM, and wet lead-acid batteries with three selectable output voltages.

Highlights

• Three output voltage settings: 14.2 V (LiFePO4), 14.4 V (Gel/AGM), 14.7 V (wet lead-acid)
• High 30 A output current, up to 430 W power
• Efficiency above 90%
• Temperature-controlled fan for reliable cooling
• Protection against overload, short circuit, overtemperature, and reverse polarity

In daily use

Install the booster close to the auxiliary battery, connect it to the alternator via D+ or a manual switch, and select the appropriate voltage for your battery type. The compact aluminum housing and screw terminals for up to 16 mm² cables make installation straightforward. Standby consumption is under 1 mA, so it won't drain your battery when idle.

Full specifications

• Input voltage range: 8–14 V DC
• Output voltage settings: 14.2 V / 14.4 V / 14.7 V DC
• Maximum output current: 30 A
• Maximum output power: 430 W
• Efficiency: > 90%
• Control input: D+ (alternator signal) or manual switch
• Supported battery types: Lead-acid (Gel, AGM, Wet), LiFePO4
• Protection features: Overload, Short Circuit, Overtemperature, Reverse Polarity
• Cooling: Temperature-controlled fan
• Standby current consumption: < 1 mA
• Operating temperature range: -20°C to +50°C
• Housing material: Aluminum
• Connection terminals: Screw terminals (up to 16 mm²)
• Galvanic isolation: No
• Mounting type: Surface mount

Final note

Designed for 12 V systems, this booster ensures your auxiliary battery receives a full charge, extending its life and performance.