Memória Desktop DDR3 16GB (2x8GB) 2133MHz G.SKILL RipjawsX 240-pin DIMM, 1,6V, CL12, Dual-Channel, dissipador

The G.Skill RipjawsX DDR3 16GB 2133MHz kit (2 x 8GB) provides 16 GB of system memory in a dual-module configuration. Designed for PC and server platforms, this DDR3 memory runs at 2133 MHz with CAS latency 12 and uses the standard 240-pin DIMM form factor. The modules operate at 1.6 V and are intended to deliver stable, high-speed memory capacity for multitasking and performance-oriented workloads.

Advantages

G.Skill RipjawsX modules combine relatively high clock speed with a mid-range CAS latency to offer a balance between throughput and responsiveness. The 2 x 8 GB kit format enables dual-channel operation on compatible motherboards, increasing memory bandwidth. The standard 240-pin DIMM design and common voltage make these modules broadly compatible with many systems that support DDR3 memory.

Suitable for

• Desktop PC upgrades requiring 16 GB DDR3 memory
• Home and office multitasking and productivity workloads
• Systems supporting 240-pin DDR3 DIMMs and 1.6 V operation
• Environments where dual-channel memory configuration is desired

Key specifications

• Brand: G.SKILL
• Model / MPN: F3-2133C10D-16GXM
• Capacity: 16 GB (2 x 8 GB)
• Type: DDR3
• Clock speed: 2133 MHz
• CAS latency: 12
• Form factor: 240-pin DIMM
• Voltage: 1.6 V
• EAN: 4711148597524

How to use

Power off the computer and unplug it from the mains before installing memory. Open the system case, locate the appropriate DDR3 240-pin DIMM slots on the motherboard, and refer to the motherboard manual for the correct slot population to enable dual-channel mode. Align the module notch with the slot key, insert the module evenly until the retention clips click into place, then close the case and reconnect power. On first boot, enter BIOS/UEFI to verify the detected memory size and frequency; enable any XMP/DOCP profile if supported and required to reach rated speed.

Recommendations

For reliable operation, match RipjawsX modules in identical pairs and confirm motherboard support for 2133 MHz DDR3 and 1.6 V operation. If stability issues occur at rated speed, try standard JEDEC speeds or adjust voltage/timings per motherboard guidance.