Microconnect B-FTP615R Cabo de rede vermelho 15 m Cat6 F/UTP (FTP)

The Microconnect B-FTP615R is a 15 m Cat6 networking cable with RJ-45 connectors designed for reliable high-speed data transfer up to Cat6 standard frequencies. The cable supports data rates up to 10000 Mbit/s and includes F/UTP (B-FTP) shielding to reduce electromagnetic interference. Its red jacket and latch-protected connectors make it suitable for visible installations and for routing through confined spaces without damaging the connector clip.

Advantages

Shielded construction (F/UTP) reduces EMI and crosstalk, maintaining signal integrity and lowering transmission errors. Cat6 rating ensures testing up to 250 MHz and backward compatibility with Cat5e and Cat5 networks. Latch protection on the RJ-45 plugs prevents clip breakage during installation, and the 15 m length provides flexibility for home and office wiring.

Suitable for

• Connecting switches, routers or modems to patch panels, keystone jacks or wall outlets
• Home networks and small office LAN installations
• Entertainment systems, streaming devices and gaming setups
• Environments where EMI protection is required

Key specifications

• Model: Microconnect B-FTP615R
• Length: 15 m
• Standard: Cat6 (tested up to 250 MHz)
• Data rate: up to 10000 Mbit/s
• Connectors: RJ-45 to RJ-45 with latch protection
• Shielding: F/UTP (foil shielded pairs, overall unshielded braid not present)
• Color: Red
• Weight: 0.268 kg
• MPN: B-FTP615R, EAN: 5711045259067

How to use

Route the cable between network devices or from device to wall outlet/patch panel and insert the RJ-45 connectors into the corresponding ports until the latch clicks. Avoid sharp bends and keep the cable away from strong electrical interference sources where possible. For wall or panel installations, feed the cable carefully through the opening to protect the latch and ensure secure seating of the connector.

Recommendations

For optimal performance, use the cable within its 15 m length limit without excessive coiling, maintain bend radius recommended for Ethernet cables, and connect to Cat6-compatible ports. If additional EMI protection is needed in mixed-shielding environments, ensure proper grounding of shielded panels or connectors.