Microconnect SSTP620W Cabo de rede branco 20 m Cat6 S/FTP (S-STP)

Networking Cable Microconnect SSTP620W RJ-45 Cat6 20 m White is a shielded Cat6 patch cable designed for reliable wired connections between network devices such as switches, routers, modems and wall outlets. With a length of 20 m and RJ-45 connectors on both ends, this cable supports Cat6 performance up to 250 MHz and data rates up to 10000 Mbit/s while remaining backwards compatible with Cat5e and Cat5 installations.

Advantages

The S/FTP shielding provides protection against electromagnetic interference (EMI) and reduces crosstalk, helping to maintain signal integrity and lower transmission errors. The cable includes latch protection on the RJ-45 plugs to prevent connector damage during installation in tight spaces. Its white outer jacket offers a discreet appearance for home or office environments.

Suitable for

• Connecting switches, routers, modems and patch panels
• Home networks and small office LANs
• Audio/video and entertainment setups requiring stable wired connections
• Wall outlets and keystone jack installations

Key specifications

• Length: 20 m
• Standard: Cat6 (tested to 250 MHz)
• Shielding: S/FTP (shielded foil around pairs with overall braid)
• Connectors: RJ-45 to RJ-45 with latch protection
• Maximum data rate: up to 10000 Mbit/s
• Colour: White
• Weight: 0.638 kg

How to use

Route the Networking Cable Microconnect SSTP620W between the two network endpoints and insert the RJ-45 connectors into the corresponding ports until the latch clicks. When running the cable through conduit or behind panels, take care to avoid sharp bends and excessive pulling tension that could damage the internal conductors or shielding. For best performance, keep the cable away from strong sources of electrical noise and avoid tightly coiling it.

Recommendations

For installations where EMI is a concern—near power equipment, fluorescent lighting or dense cable bundles—use this S/FTP shielded Cat6 cable to reduce interference and maintain reliable network throughput. Verify connectors are fully seated and test links after installation to confirm expected performance.