Microconnect UTP6004 Cabo de rede cinzento 0,4 m Cat6 U/UTP (UTP)

The Microconnect UTP6004 is a 0.4 m Cat6 U/UTP networking cable with RJ-45 connectors on both ends. It supports high-speed data transmission up to 10000 Mbit/s and is designed for connecting network devices such as switches, modems, routers or patch panels in small office, home network and entertainment setups. The cable meets Cat6 performance up to 250 MHz and is backwards compatible with Cat5e and Cat5 standards. The grey jacket and compact length make it suitable for short interconnects and tidy installations.

Advantages

The cable provides Cat6 performance tested up to 250 MHz and supports up to 10000 Mbit/s data rates, while maintaining compatibility with older Cat5e/Cat5 equipment. U/UTP construction ensures reliable signal transmission for typical office and home network tasks. RJ-45 connectors on both ends with latch protection reduce the risk of connector damage during installation in confined spaces. Its 0.4 m length offers a neat, short connection between nearby devices.

Suitable for

• Connecting switch to router, modem or patch panel
• Short links between network devices in small office or home LANs
• Connecting devices to wall jacks or keystone inserts
• Entertainment equipment and media players requiring wired Ethernet

Key specifications

• Brand: MicroConnect
• Model: UTP6004 (MPN: UTP6004)
• Cable type: Cat6 U/UTP
• Length: 0.4 m
• Connectors: RJ-45 — both ends
• Data rate: up to 10000 Mbit/s
• Frequency: tested up to 250 MHz (Cat6)
• Color: Grey
• Weight: 0.02 kg
• EAN: 5712505035955

How to use

Plug one RJ-45 connector into the network port of the source device (for example a router or switch) and the other connector into the target device or patch panel. Ensure the connectors click into place via the latch protection. Route the cable without tight bends and avoid excessive pulling; secure it with cable ties if needed to keep installations tidy and to prevent stress on the connectors.

Recommendations

For best performance, keep the cable length short where possible and avoid running it in parallel with power cables. Use this Cat6 cable for short interconnects; for longer runs within buildings use appropriately rated in-wall or shielded cables and follow local installation standards.