Módulo de memória PATRIOT Viper Elite 5 Ultra VEU532G6036K 32 GB (2x16 GB) DDR5 6000 MT/s 288-Pin-DIMM CL36 1,35V

Memory module PATRIOT Viper Elite 5 Ultra VEU532G6036K is a dual-channel desktop kit with a total capacity of 32 GB (2 × 16 GB) DDR5 modules. The kit operates at 6000 MT/s with CAS latency CL36 on standard 288-pin DIMM format and a typical operating voltage of 1.35 V. Designed for system memory upgrades, this kit improves multitasking, gaming and content-creation workloads while maintaining compatibility with current DDR5 platforms.

Advantages

The Viper Elite 5 Ultra kit combines high transfer rate and tested platform compatibility to deliver stable performance under sustained loads. The aluminum heatshield provides passive thermal management to reduce thermal throttling during heavy use. Support for Intel XMP 3.0 and AMD EXPO profiles simplifies profile-based overclocking and system setup. Modules are hand-tested on modern platforms to help ensure plug-and-play reliability.

Suitable for

• High-performance gaming PCs that need fast, low-latency system memory
• Workstations for photo, video and 3D content creation that benefit from increased memory bandwidth
• Multitasking systems running multiple applications and browser tabs simultaneously
• System upgrades for modern motherboards that accept 288-pin DDR5 DIMM modules

Key specifications

• Total capacity: 32 GB (2 × 16 GB)
• Memory type: DDR5
• Data rate: 6000 MT/s
• CAS latency: CL36
• Form factor: 288-pin DIMM
• Nominal voltage: 1.35 V
• Heatspreader: Aluminum low-profile heatshield
• Overclocking profiles: XMP 3.0 and EXPO support
• Designed for desktop/ATX systems supporting DDR5
• Module configuration: Dual-channel kit (2 modules)

How to use

Install the two modules into matching DIMM slots on a compatible motherboard following the motherboard manual for dual-channel population. Ensure the system is powered off and unplugged before installation. After physical installation, enter the system BIOS/UEFI to verify detected memory settings. To enable rated speeds and timings, load the appropriate XMP or EXPO memory profile in BIOS/UEFI; save settings and reboot. If stability issues occur, revert to JEDEC defaults or adjust voltage/timings incrementally.

Recommendations

For reliable performance, use these modules in motherboards with verified DDR5 support and with the latest BIOS updates. Ensure adequate case airflow to assist the aluminum heatshield in passive cooling. When enabling XMP or EXPO profiles, monitor system stability with memory stress tests and, if necessary, update platform firmware to the manufacturer-recommended version.