Módulo transceptor de fibra ótica BlueOptics 2702397-BO 1250 Mbit/s SFP

The BlueOptics 2702397-BO is a fiber optic transceiver module in SFP form factor designed for single-port optical links. It supports a maximum data transfer rate of 1250 Mbit/s and is presented in a silver housing with a compact footprint and a lightweight construction of approximately 20 g. The module is built to meet common regulatory standards and is intended for insertion into compatible SFP slots on switches, routers or media converters to enable optical connectivity.

Advantages

The module offers a standardized SFP interface for hot-pluggable installation and supports sustained operation with a rated MTBF of 1,000,000 hours. Its compact size and low weight simplify deployment in dense rack environments and equipment with limited space. Compliance with CE, FCC and RoHS ensures conformity with international safety, electromagnetic compatibility and environmental requirements.

Suitable for

• Short- and mid-range fiber links in enterprise networks
• Upgrading copper ports to fiber on switches and routers with SFP slots
• Use in media converters and network appliances that accept SFP transceivers
• Environments where a compact, lightweight transceiver is required

Key specifications

• Form factor: SFP (hot-pluggable)
• Maximum data rate: 1250 Mbit/s
• Housing colour: silver
• Weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours
• Standards compliance: CE, FCC, RoHS

How to use

Power down the host device if recommended by the equipment manufacturer, insert the SFP transceiver into an available SFP slot until it seats firmly, and ensure the locking mechanism engages. Connect a compatible fiber patch cable to the transceiver’s optical port, observing correct transmit/receive orientation. After physical installation, verify link status on the host device and configure network settings such as speed, duplex and interface parameters as required by the network design.

Recommendations

Store and handle the transceiver in a clean, dry environment. Avoid touching the optical connector endfaces and use dust caps when the module is not connected. Verify compatibility with the host device's SFP specifications and firmware, and follow manufacturer guidance for electrostatic discharge (ESD) precautions during installation.