Módulo transceptor de rede BlueOptics SFP-10G-ZR-NG-BO 10000 Mbit/s SFP+ 1550 nm

The BlueOptics SFP-10G-ZR-NG-BO is a 10GBASE-ZR SFP+ fiber optic transceiver module designed for high-speed single-mode fiber links. It supports a maximum data rate of 10000 Mbit/s over long distances using a 1550 nm wavelength and provides an SFP+ interface in a durable metal housing. The module is compact and lightweight, with a low operating voltage of 3.3 V, and uses an LC duplex optical connector for simultaneous transmit and receive on separate fibers.

Advantages

This transceiver offers 10 Gbit/s performance suitable for long-reach single-mode fiber connections while maintaining a compact, metal housing for mechanical robustness. It follows MSA SFP+ standards, ensuring interoperability with compatible network equipment that accepts 10GBASE-ZR SFP+ modules. The module's low weight and standard 3.3 V power requirement simplify installation and integration into switches, routers and storage systems. Built-in digital diagnostics (DDM/DOM) support enables remote monitoring of parameters such as supply voltage, optical power and temperature when the host device supports these features.

Suitable for

Key specifications

How to use

Insert the SFP-10G-ZR-NG-BO module into an SFP+ slot of a compatible switch, router or other network device while the device is powered per the host manual. Connect single-mode LC duplex patch cords to the module's transmit and receive ports, ensuring correct fiber polarity. Configure the host port for 10G operation according to the equipment vendor instructions and verify link status. If the host supports DDM/DOM, monitor supply voltage, optical output/input power and temperature via the device management interface to assess link health.

Recommendations

Use certified single-mode fiber and high-quality LC duplex patch cords to achieve the specified range and performance. Confirm device compatibility with the host vendor and enable DDM/DOM monitoring if available. Avoid exposing the transceiver to mechanical stress or contaminants on the optical interfaces; keep protective caps on connectors when not in use.