Módulo transceptor de rede BlueOptics SFP28-25G-ER-MT-BO 25000 Mbit/s 1310 nm

The BlueOptics SFP28-25G-ER-MT-BO network transceiver module is a compact fiber optic interface designed for 25 Gbit/s links over single-mode fiber. Built with a metal housing and an SFP28 form factor, this module supports a 1310 nm optical wavelength and operates from a 3.3 V supply. Lightweight and RoHS compliant, it is intended for integration into switches, routers and other network devices that accept SFP28 modules for extended-reach connections.

Advantages

The module offers a standardized SFP28 interface for easy hot-plug installation and interoperability with compatible network equipment. Its metal housing provides physical durability and thermal conduction for stable operation. With a 25 Gbit/s maximum data rate and a 1310 nm wavelength optimized for single-mode links, the transceiver supports high-speed, longer-distance connections while remaining compact and lightweight.

Suitable for

• 25 Gbit/s single-mode fiber links in data center and telecom networks
• Upgrading switch or router ports to SFP28 high-speed interfaces
• Point-to-point backbone connections requiring extended reach
• Environments where RoHS compliance and small form-factor transceivers are required

Key specifications

• Form factor: SFP28
• Maximum data transfer rate: 25000 Mbit/s (25 Gbit/s)
• Optical wavelength: 1310 nm
• Power supply voltage: 3.3 V
• Housing material: metal
• Weight: 0.02 kg
• Product colour: silver
• Compliance: RoHS

How to use

Ensure the host device supports SFP28 transceivers and is powered down or set to allow hot-plug insertion according to the device manual. Align the module with the SFP28 port and insert until it latches; verify the module is fully seated. Connect appropriate single-mode fiber patch cables matched to the 1310 nm wavelength and secure any required LC or MPO adapters as needed. After insertion, check link status indicators on the host and confirm negotiated speed and optical signal levels using the management interface or diagnostic tools.

Recommendations

Handle the transceiver by the housing, avoid touching the optical interfaces, and keep protective dust plugs in place when not connected. Use single-mode fiber compatible with 1310 nm optics and ensure connectors are clean to maintain signal quality. Follow equipment vendor guidelines for supported modules and firmware versions to ensure compatibility and reliable operation.