Módulo transceptor SFP BlueOptics 1100-0543-BO 125 Mbit/s fibra ótica

The BlueOptics 1100-0543-BO is an SFP transceiver module for fiber optic links with a maximum data transfer rate of 125 Mbit/s. It has an aluminium-coloured metal housing and a compact form factor with a weight of approximately 20 g. Supplied as a single module, it connects via the SFP interface and is intended for use in compatible networking equipment to provide reliable optical connectivity.

Advantages

This SFP transceiver offers a compact, industry-standard SFP form factor that fits many switches, routers and other network devices supporting SFP modules. Its metal housing supports heat dissipation and mechanical durability while the lightweight design simplifies handling and installation. The module provides fiber-based connectivity which is inherently immune to electromagnetic interference and suitable for longer-distance network links compared with copper cabling.

Suitable for

• Standard fiber optic uplinks in switches and routers
• Network segments requiring immunity to electromagnetic interference
• Replacement or spare SFP module for compatible hardware

Key specifications

• Interface type: SFP
• Maximum data transfer rate: 125 Mbit/s
• Housing material/colour: aluminium-coloured metal
• Weight: 0.02 kg
• Pack quantity: 1 module

How to use

Install the BlueOptics SFP module into a compatible SFP slot on a switch, router or other network device while the device is powered down or according to the vendor’s hot-swap guidelines. Connect an appropriate fiber optic patch cable to the module’s fiber connector and configure the device’s port settings as required by your network (speed, duplex and link settings). Verify link status and, if supported by the hardware, monitor optical parameters through the host device management interface.

Recommendations

Handle the module by its edges and avoid touching the optical connector endface. Use dust caps when the transceiver is not connected. Ensure the connected fiber type and patch cables match the transceiver and host equipment specifications. Confirm compatibility with the target device before installation and follow the device manufacturer’s guidelines for hot-plugging and diagnostics.