Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm

Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
91,28 €
The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and... Ler mais
Stock 90 Código 1484949 Marca BLUEOPTICS Modelo SFP-GLSD-70-A-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Quarta-feira, Outubro 21
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and uses a standard SFP interface with an LC duplex optical connector. It requires a 3.3 V supply and is intended for use in networking equipment that accepts MSA‑compliant SFP transceivers.

Advantages

The module follows MSA SFP form‑factor standards, which helps ensure interoperability with a wide range of switches, routers and storage devices that support compatible 1000BASE‑ZX transceivers. Its metal housing provides mechanical stability and thermal dissipation while the lightweight design keeps module weight minimal. Operating at 1550 nm and rated for up to 1250 Mbit/s, it is suitable for long‑reach single‑mode fiber links when used with appropriate patch cords and fiber infrastructure.

Suitable for

Key specifications

How to use

Install the transceiver into an SFP slot of a compatible network device while the device is powered according to the vendor guidance or hot‑plug as supported. Connect LC duplex single‑mode patch cords to the transmitter and receiver ports, ensuring correct TX/RX orientation and proper fiber polishing/cleaning. Configure the host device network settings to enable the link and verify operational parameters such as link speed and diagnostics through the device management interface. Confirm that the receiving endpoint and any intermediate equipment support 1550 nm single‑mode optics and the expected link distance.

Recommendations

Use high‑quality single‑mode LC duplex patch cords and clean connector endfaces before mating. Verify compatibility with the host hardware and enable Digital Diagnostic Monitoring (DDM/DOM) on platforms that support it to monitor supply voltage, optical power and temperature for proactive maintenance.

Destaques principais
  • Long‑reach single‑mode fiber Ethernet links (1000BASE‑ZX)
  • Interconnection of switches, routers and optical aggregators
  • Fibre Channel over Ethernet and SDH/SONET applications up to 1.25 Gbit/s
  • Replacement of MSA‑compatible SFP transceivers in compatible hardware
  • Interface type: SFP (MSA form factor)
  • Maximum data transfer rate: 1250 Mbit/s
  • Wavelength: 1550 nm
  • Connector: LC duplex (optical)
  • Supply voltage: 3.3 V
  • Housing: metal
  • Weight: approx. 0.003 kg
  • Fiber type: single‑mode
Especificações
Comprimento de onda
1550 nm
Comprimento de onda Rx (máx.)
1550 nm
Comprimento de onda Tx (máx.)
1550 nm
Conector de fibra ótica
SFP
Cor do produto
Silver
Distância máxima de transmissão
80000 m
Material da carcaça
Metal
Norma do transceiver SFP
ZX
Peso
0.003 kg
Peso da embalagem
2 g
Quantidade por embalagem
1 pc(s)
Sistema duplex
Full
Taxa máxima de transferência de dados
1250 Mbit/s
Tecnologia de cablagem Ethernet de fibra
1000BASE
Temperatura de armazenamento (T-T)
-40 - 85
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Temperatura mínima de funcionamento
0 °C
Tensão de entrada
3.3
Tipo de interface
SFP
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Atual
91,28 €
Mais baixo
89,49 €
Mais alto
92,97 €
Variação 24 h
+1,13 €   +1%
Semana
+0,98 €   +1%
Mês
+1,11 €   +1%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.