Módulo transceptor SFP BlueOptics SFPFX-BO 155 Mbit/s 1310 nm

The BlueOptics SFPFX-BO 155 Mbit/s 1310 nm is a fiber optic SFP transceiver module designed for reliable optical data transfer at up to 155 Mbit/s. The module uses a 1310 nm wavelength and fits the compact industry-standard SFP form factor. It features an LC duplex connector for fiber connection, supports a maximum transfer distance of 2000 m over suitable fiber, and has a lightweight silver metal housing weighing approximately 0.02 kg. The module is intended for deployment in networking equipment that accepts SFP transceivers and for point-to-point optical links requiring stable single-wavelength transmission.

Advantages

The BlueOptics SFPFX-BO provides a standardized SFP footprint for easy hot-plug installation and interoperability with equipment that supports SFP optics. Operating at 1310 nm and supporting up to 155 Mbit/s, the transceiver is suitable for legacy Fast Ethernet and synchronous transport applications up to the stated data rate and distance. Its LC duplex connector enables simultaneous transmit and receive over two fibers, while the compact and lightweight metal housing facilitates installation in dense rack environments.

Suitable for

Key specifications

How to use

Install the BlueOptics SFPFX-BO by inserting the module into a compatible SFP port of a switch, router or media converter while the host device is powered according to the vendor's instructions for hot-pluggable optics. Connect LC duplex fiber patch cords to the module's transmit and receive ports, ensuring correct polarity. Verify link status on the host device and configure the interface according to the network requirements. Use single- or multi-mode fiber appropriate for the intended distance and follow the equipment vendor's guidance for optical power and diagnostics support.

Recommendations

Ensure the host hardware supports 1310 nm SFP optics and the required data rate. Use clean LC connectors and appropriate fiber type for the 2000 m range. If digital diagnostics (DDM/DOM) are required, confirm that the host device exposes those telemetry features for this module. Store and handle the transceiver in a static-safe environment and avoid exposure to strong mechanical shock or contaminants on optical interfaces.