Conta Contactos
O seu carrinho
Envio por DPD e FedEx
Precisa de ajuda? Pergunte à IA

Módulo transceptor SFP+ BlueOptics UF-SM-10G-S-1270-20-BO 10000 Mbit/s

Módulo transceptor SFP+ BlueOptics UF-SM-10G-S-1270-20-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics UF-SM-10G-S-1270-20-BO 10000 Mbit/s
97,39 €
The BlueOptics UF-SM-10G-S-1270-20-BO is an SFP+ fiber optic transceiver module designed for single-mode optical links with a maximum data transfer rate of 10000 Mbit/s. Housed in a metal casing and operating at 3.3 V, this compact silver module weighs 20 g and uses an SFP+ connector with LC simplex... Ler mais
Stock 50 Código 1504166 Marca BLUEOPTICS Modelo UF-SM-10G-S-1270-20-BO Garantia 2 anos

Envios e devoluções

Entrega prevista Quinta-feira, Outubro 22
Receberá atualizações através do nosso sistema de seguimento detalhado
Opções de pagamento
Cartão bancárioVisaMastercardPayPalApple PayGoogle PayTransferência bancária

The BlueOptics UF-SM-10G-S-1270-20-BO is an SFP+ fiber optic transceiver module designed for single-mode optical links with a maximum data transfer rate of 10000 Mbit/s. Housed in a metal casing and operating at 3.3 V, this compact silver module weighs 20 g and uses an SFP+ connector with LC simplex interface. It supports point-to-point transmission over long distances up to 20,000 m and complies with common MSA standards for SFP+ compatibility.

Advantages

The module supports 10GBASE-BX-U style bidirectional transmission on a single fiber and integrates digital diagnostics monitoring (DDM/DOM) for real-time reporting of supply voltage, laser bias current, optical output and input power, and temperature. Constructed with a metal housing and high-quality components, it offers long operational lifetime and high availability for critical network links. Its standardized SFP+ form factor ensures broad interoperability with hardware platforms that accept MSA-compliant transceivers.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP+ module into an MSA-compliant SFP+ port until it latches securely and ensure the host device is powered off or follows the vendor's hot-swap guidance. Connect the LC simplex fiber patch cable observing correct polarity and single-mode specifications. Verify link status in the host equipment and, if supported, enable or query DDM/DOM parameters to monitor optical performance. Follow the equipment vendor’s instructions for any required configuration of port speed, duplex, or protocol settings.

Recommendations

Use single-mode LC simplex patch cords and proper fiber management (patch panels, strain relief) to achieve the specified 20 km reach. Confirm compatibility with the intended host hardware and enable DDM/DOM only if the host supports it to access diagnostic data. Keep the transceiver and fiber connectors clean and store spare modules in anti-static packaging to maintain performance and longevity.

Destaques principais
  • High-speed Ethernet links up to 10 Gbit/s over single-mode fiber
  • Long-reach point-to-point connections up to 20 km
  • Data center uplinks and aggregation between switches and routers
  • Storage network connections (FCoE) and other high-bandwidth applications
  • Maximum data transfer rate: 10000 Mbit/s
  • Maximum transfer distance: 20000 m (single-mode fiber)
  • Connector type: SFP+ with LC simplex interface
  • Optical transmission: bidirectional 1270 nm receiver / 1330 nm transmitter (10GBASE-BX-U compatible)
  • Operating voltage: 3.3 V
  • Housing: metal, product colour silver
  • Weight: 0.02 kg
  • Digital Diagnostics Monitoring (DDM/DOM) support (MSA SFF-8472)
Especificações
Comprimento de onda Rx (máx.)
1330 nm
Comprimento de onda Tx (máx.)
1270 nm
Conector de fibra ótica
SFP+
Cor do produto
Silver
Distância máxima de transmissão
20000 m
Material da carcaça
Metal
Norma do transceiver SFP
BX-U
Peso
0.02 kg
Peso da embalagem
30 g
Quantidade por embalagem
1 pc(s)
Sistema duplex
Full
Taxa máxima de transferência de dados
10000 Mbit/s
Tecnologia de cablagem Ethernet de fibra
10GBASE
Temperatura de armazenamento (T-T)
0 - 90
Temperatura de funcionamento (T-T)
0 - 70
Temperatura máxima de funcionamento
70 °C
Temperatura mínima de funcionamento
0 °C
Tensão de entrada
3.3
Tipo de interface
SFP+
Tipo de transceiver SFP
Fiber optic
Histórico de preços nos últimos 6 meses
Módulo transceptor SFP+ BlueOptics UF-SM-10G-S-1270-20-BO 10000 Mbit/s
Atual
97,39 €
Mais baixo
95,88 €
Mais alto
101,04 €
Variação 24 h
+0,77 €   +1%
Semana
+0,57 €   +1%
Mês
+1,00 €   +1%

Produtos populares nesta categoria

Olá, sou o assistente de IA da DistriNode. Posso ajudá-lo a encontrar produtos, comparar opções, criar orçamentos em PDF ou abrir pedidos de suporte.