Módulo transceptor SFP BlueOptics USFP-GB/SS13-D-R-BO 1250 Mbit/s 1310 nm

The BlueOptics USFP-GB/SS13-D-R-BO is a single-mode fiber SFP transceiver module designed for 1.25 Gigabit Ethernet links. It supports a maximum data transfer rate of 1250 Mbit/s over distances up to 20 km using a 1310 nm optical wavelength. The module is housed in a metal enclosure, has an LC simplex fiber connector and a compact form factor suitable for standard SFP ports. Its silver metal housing and lightweight design (approximately 20 g) simplify installation and handling in networking equipment.

Advantages

This BlueOptics SFP transceiver provides stable single-mode optical connectivity with support for common high-speed protocols up to 1.25 Gbit/s. Built to MSA-compatible mechanical dimensions and using a metal housing, it offers reliable physical protection and thermal performance in rack and chassis installations. The LC connector and single-fiber operation enable straightforward integration with standard patch cords and optical infrastructure. The combination of distance capability and industry-standard interfaces makes it suitable for extending Ethernet links without electrical interference.

Suitable for

Key specifications

How to use

Install the SFP transceiver into a compatible SFP port on your switch, router or media converter while the device is powered down or following the equipment manufacturer's hot-swap instructions. Connect an LC simplex single-mode patch cord to the module and to the mating transceiver or patch panel. Ensure the transmit and receive directions are correctly paired with the remote module and that fiber connectors are clean before mating. Configure the network device interface according to your network settings and verify the link status through the host equipment's management interface or LEDs.

Recommendations

For reliable operation, use single-mode fiber rated for the desired distance and quality LC patch cords. Verify that the host device supports SFP modules and, if required, Digital Diagnostics Monitoring (DDM/DOM) to access real-time operating parameters. Keep fiber connectors clean, avoid bending the fiber beyond recommended radii, and follow electrostatic discharge precautions when handling the transceiver.