Conjunto de lâmpadas halogéneas Ledvance H11 12V 3700K, 2 unid.

Set of 2 Ledvance H11 12V 3700K halogen bulbs designed for automotive use. These H11 bulbs provide a warm-white light with a color temperature of 3700K and are intended as direct replacements for vehicles that use H11 fittings. The pair is supplied to help maintain matched light output and color balance on both sides of the vehicle, suitable for low beam, fog lights or auxiliary lamps in 12V systems.

Advantages

These Ledvance H11 bulbs offer consistent color temperature across both bulbs in the set, ensuring even illumination and reduced visual mismatch between left and right lamps. Their construction follows common automotive halogen specifications for H11 fittings, providing simple plug-and-play installation without modifications to the vehicle electrical system. Sold as a matched pair, the set reduces the risk of uneven aging and light output that can occur when replacing bulbs individually.

Suitable for

• Replacement of H11 low beam bulbs in compatible vehicles
• Fog light upgrades or replacements using H11 fittings
• Auxiliary or driving lamps requiring 12V H11 halogen bulbs

Key specifications

• Base type: H11-compatible automotive fitting
• Voltage: 12 V automotive electrical systems
• Color temperature: 3700 K (warm white)
• Package quantity: 2 bulbs (matched pair)
• Bulb technology: halogen

How to use

Turn off the vehicle and allow the lamp assembly to cool before replacing bulbs. Access the headlamp or fog lamp housing according to the vehicle manufacturer instructions, remove the old H11 bulb by disconnecting the connector and releasing the retaining mechanism, then install the new Ledvance H11 bulb by seating it in the socket and securing the retainer. Reconnect the electrical connector and verify correct operation before reassembling any removed covers. Avoid touching the glass envelope with bare fingers to prevent oil deposits that can shorten bulb life.

Recommendations

For balanced illumination, replace both bulbs in the same axle at the same time and confirm that the vehicle’s headlamp adjustment is within specification after installation. Use these halogen bulbs only in approved H11 housings and ensure compatibility with vehicle lighting controls and any automatic leveling or washer systems.