Lâmpada de xénon HID para automóvel Ledvance D2S 85V 35W P32D-2 4500K

Ledvance D2S 85V 35W P32D-2 4500K is an automotive HID xenon replacement bulb intended for vehicles with D2S headlight fittings. Rated at 35 watts and designed to operate at 85 volts, this HID lamp produces a neutral white light at 4500K color temperature to support clear roadway illumination in nighttime and low-visibility conditions. The bulb is compatible with headlight systems engineered for D2S HID modules and delivers stable light output suitable for original-equipment style xenon housings.

Advantages

This Ledvance D2S xenon bulb provides consistent luminous flux and a colour temperature optimized for balanced contrast between road markings and surroundings. The 35W power rating matches typical automotive HID system requirements, ensuring compatibility with vehicles that use standard D2S ballast and connectors. Construction and glass envelope are designed to maintain light stability and colour consistency over typical operating cycles.

Suitable for

• Vehicles equipped with D2S HID headlight fittings
• Night driving where neutral white light improves visibility
• Driving in rain, fog, or other low-visibility conditions
• Replacement of burned-out or degraded D2S xenon bulbs

Key specifications

• Operating voltage: 85 V
• Power consumption: 35 W
• Base/fitting type: P32D-2 (D2S form factor)
• Color temperature: 4500 K (neutral white)
• Light source type: HID xenon
• Application: vehicle headlight units designed for D2S bulbs

How to use

Install the Ledvance D2S bulb into the headlight housing following the vehicle manufacturer’s instructions for D2S lamp replacement. Ensure the ignition and ballast are switched off and cool before beginning work. Handle the bulb by the ceramic base only; avoid touching the glass envelope to prevent contamination that can affect performance and lifetime. After seating the bulb and securing any retaining clips, reconnect the ballast and test the headlight to confirm correct ignition and beam alignment.

Recommendations

Use only with compatible D2S ballasts and headlight assemblies. If the existing ballast shows signs of wear or if adaptive headlight electronics are present, verify compatibility before replacement. Replace bulbs in matched pairs when possible to ensure uniform light output and color balance across both headlights.