Pasta térmica SAVIO TG-03 1 g — 13,5 W/m·K, cinzento, inclui aplicador e espátula

SAVIO TG-03 is a thermal paste formulated to improve heat transfer between processors (CPU/GPU) and heatsinks. With a measured thermal conductivity of 13.5 W/m·K and carbon microparticles that fill microscopic surface cavities, the compound enables efficient dissipation of heat while remaining non-conductive electrically. It is available in small syringe-style packaging that preserves the paste for multiple uses.

Advantages

SAVIO TG-03 provides high thermal conductivity due to carbon microparticles that effectively bridge uneven surfaces, ensuring fast heat flow to the cooling system. The formulation contains no metal oxides, so the paste is not electrically conductive, lowering the risk of short-circuits and corrosion. The consistency is balanced for straightforward spreading, and the syringe packaging with a spatula supports repeated, controlled application.

Suitable for

• Thermal interface between CPU and cooler
• GPU cooling assemblies
• Heatsinks on motherboards, chipsets and power components
• System upgrades and overclocking

Key specifications

• Thermal conductivity: 13.5 W/m·K
• Weight: 1 g (product variant)
• Colour: Grey
• Electrical behaviour: non-conductive (no metal oxides)
• Packaging: syringe with spatula, designed to prevent drying

How to use

Clean both surfaces (CPU IHS and heatsink base) with isopropyl alcohol and a lint-free cloth to remove old paste and contaminants. Apply an appropriate pea-sized or line amount of SAVIO TG-03 in the centre of the CPU, then mount the cooler and tighten mounting hardware evenly to spread the paste. For larger contact areas or GPUs, distribute the paste evenly with the supplied spatula before reattaching the cooler. Remove excess paste from surrounding areas before powering the system.

Recommendations

Use the smallest amount that still allows full coverage after cooler installation; avoid applying excessive paste. Store the syringe capped in a cool, dry place to preserve consistency. When overclocking, check temperatures after initial runs and reapply paste if thermal performance degrades over time.