Cabo HDMI FiberX FX-I355-010 10 m HDMI tipo A Standard cinzento prateado

The FiberX FX-I355-010 is a 10 m HDMI Type A cable from PureLink designed to transmit HDMI 2.0 signals over long distances using a hybrid fiber-and-copper construction. The optical fibers carry the AV stream free from electromagnetic interference while copper conductors handle power (5 V) and control/data lines (HPD, CEC). The cable conforms to the HDMI "Premium High Speed with Ethernet" standard, supports up to 18 Gbit/s bandwidth, 4K/UltraHD at 60 Hz, HDCP 2.2, ARC and eARC (when supported by connected devices), and provides zero-frame-delay, uncompressed transmission. The grey/silver cable features gold-plated HDMI-A ULS™ connectors and a slim 4.5 mm diameter for tight installations.

Advantages

The hybrid optical/copper design enables much longer runs than conventional copper HDMI cables while preventing electromagnetic interference to the AV signal. Support for HDMI 2.0 features (18 Gbit/s, 4K@60 Hz, HDCP 2.2, ARC/eARC) ensures compatibility with modern sources and displays. The patented Ultra-Lock-System™ secures the connector in the socket with a 360° locking switch to prevent accidental disconnection. A small cable diameter and tight bending radii simplify installation in racks and confined spaces. Gold-plated contacts resist corrosion for reliable long-term connections, and the halogen-free construction reduces smoke emission in case of fire.

Suitable for

• Connecting 4K/UltraHD TVs and projectors to HDMI 2.0 sources
• AV installations in racks and tight spaces where long cable runs are required
• Home cinema systems and gaming consoles requiring 4K@60 Hz and HDCP 2.2
• Setups needing ARC/eARC support for audio return (if devices support it)

Key specifications

• Model: PureLink FiberX FX-I355-010
• Length: 10 m
• Connector type: HDMI Type A (ULS™) both ends, unidirectional
• Bandwidth: up to 18 Gbit/s (HDMI 2.0)
• Resolution support: up to 4K/UltraHD @ 60 Hz
• HDCP: up to version 2.2
• Features: ARC/eARC support (device dependent), EDID transparency
• Cable diameter: 4.5 mm; bending radius: static 45 mm, dynamic 90 mm
• Contacts: gold-plated; connector body: plastic
• Construction: hybrid optical fiber + copper conductors; halogen-free
• Colour: Grey, Silver
• MPN: FX-I355-010; EAN: 4251364729427

How to use

Use the FiberX FX-I355-010 like a conventional HDMI cable: connect the source device to the sink device following the directional markings on the cable ends. The cable is unidirectional and must be connected with the correct orientation. Plug both HDMI-A ULS™ connectors into the corresponding HDMI sockets until the Ultra-Lock-System™ engages; use the 360° locking switch to lock or unlock the connector as required. No additional drivers or power supplies are needed—operation is plug-and-play. Ensure connected devices support features such as ARC/eARC or HDCP if those functions are required.

Recommendations

Install the cable respecting its unidirectional orientation and avoid sharp bends beyond the specified radii. For permanent or rack installations, use the Ultra-Lock-System™ to prevent accidental disconnection. Do not attempt to adapt the cable to other connector types; performance is guaranteed for HDMI 2.0 compatible devices up to the stated specifications.