Refrigeração líquida tudo-em-um Corsair iCUE LINK TITAN RX RGB

The CORSAIR iCUE LINK TITAN RX RGB is an all-in-one liquid cooler designed for high-performance desktop systems. It combines a compact 120 mm fan, a high-flow pump, and addressable RGB lighting to provide effective CPU cooling for modern Intel and AMD sockets while maintaining a discreet black appearance.

Advantages

The TITAN RX RGB offers peak cooling capability through high airflow and static pressure delivered by RX Series fans while keeping acoustic levels low. Its in-house FlowDrive pump uses a three-phase motor and an optimized cold plate surface to increase coolant flow and improve contact with the CPU integrated heat spreader for lower temperatures. The modular CapSwap pump cap and detachable fan side plates allow quick aesthetic changes without tools. Each unit ships with pre-applied CORSAIR XTM70 thermal paste and supports simplified setup via iCUE.

Suitable for

• Gaming desktops requiring efficient CPU cooling
• Compact builds and towers that use a 120 mm radiator
• Systems with Intel LGA 1700 / LGA 1851 and AMD AM4 / AM5 sockets

Key specifications

• Type: All-in-one liquid cooler
• Fan diameter: 120 mm
• Fan speed range: 300–2100 RPM (typical, per product family)
• Maximum air pressure: 4.33 mmH2O
• Supported sockets: Socket AM5, Socket AM4, LGA 1700
• Product colour: Black
• Weight: 1.88 kg
• Lighting: Addressable RGB on pump (20 LEDs) and fans (8 LEDs per fan)

How to use

Install the TITAN RX RGB by mounting the radiator and fans in an appropriate 120 mm-compatible location inside the case, then attach the pump block to the CPU using the included mounting brackets and backplate for your socket. Connect the pump and fans to power and RGB headers or to the CORSAIR iCUE LINK hub, then install the iCUE software to control fan curves and lighting. The cooler includes pre-applied CORSAIR XTM70 thermal paste, so no additional paste is required during initial installation.

Recommendations

For best results, ensure adequate case airflow around the radiator, configure fan curves in iCUE according to your workload, and periodically inspect mounting and tubing for secure fitment. Replace thermal paste if you remove the pump block for maintenance or CPU replacement.