Refrigerador de ar ENDORFY Fera 5 Dual Fan — 2 ventoinhas PWM de 120 mm, 4 heatpipes, TDP 220 W, compatível com LGA 2011 e vários sockets, preto

The ENDORFY Fera 5 Dual Fan is an air cooler designed to lower CPU temperatures with a compact 155 mm height and a dual 120 mm fan configuration. Its black finish and broad socket support make it suitable for a wide range of PC builds, from compact cases to standard towers. The cooler uses a densely finned heatsink and two Fluctus 120 PWM fans arranged in a push-pull setup to improve heat dissipation while maintaining low noise levels; a semi-passive mode is available for quieter idle operation.

Advantages

The dual-fan push-pull arrangement increases airflow through the heatsink, improving cooling performance compared with single-fan designs. The unit is relatively compact at 155 mm tall, allowing installation in many smaller cases. Fluctus 120 PWM fans offer precise speed control and an optional semi-passive mode for reduced noise when the CPU load is low. Broad socket compatibility covers modern Intel and AMD platforms, making the cooler versatile for upgrades and new builds.

Suitable for

• Gaming PCs with mid-range to high TDP CPUs
• Compact cases where cooler height is limited
• Workstations requiring reliable air cooling

Key specifications

• Type: Air cooler
• Fan diameter: 120 mm (two Fluctus 120 PWM fans)
• Height: 155 mm
• Colour: Black
• Supported sockets: LGA 2011-v3, LGA 2011, LGA 1700, LGA 1366, LGA 1200, LGA 2066, LGA 775, Socket AM2+, AM3+, AM4, AM5, FM1, FM2+

How to use

Mount the cooler following the included instructions and use the appropriate mounting brackets for your CPU socket. Apply a thin, even layer of thermal paste on the processor before seating the heatsink. Connect both PWM fan headers to the motherboard or a fan controller to enable synchronized speed control; if available, enable semi-passive mode in BIOS or with supported fan controllers for quieter idle operation. Ensure there is adequate case airflow and that the cooler clears RAM modules and other nearby components.

Recommendations

For optimal results, pair the ENDORFY Fera 5 Dual Fan with a quality thermal paste and configure PWM curves in the motherboard firmware to balance cooling performance and noise. Check case clearance (minimum 155 mm CPU cooler height) before purchase and confirm compatibility with tall RAM modules if necessary.