Régua de tomadas Bachmann CONI com 1x tomada CEE 7/3, 1x USB-C PD 45W, 1x ligação à rede, cabo de 0,2 m

The Bachmann CONI power strip provides a compact desktop power solution combining one grounded CEE 7/3 mains socket, a USB‑C Power Delivery port rated at 45W, and an integrated mains connector on a 0.2 m cable. Designed for home offices and small workspaces, this unit supplies mains power to a single appliance while delivering USB‑C fast charging for laptops, tablets or smartphones via PD 45W. The compact form factor and short cable make it suitable for mounting near desks, monitor stands or charging stations.

Advantages

This product integrates a grounded mains outlet and a high‑power USB‑C PD port in a small footprint, reducing the need for separate chargers and adapters on the desktop. The 45W USB‑C output supports modern laptop charging standards as well as fast charging for mobile devices. The short 0.2 m cable and single mains connector simplify placement and cable management in tight spaces while maintaining a grounded connection for safety.

Suitable for

• Charging laptops and tablets that accept USB‑C PD up to 45W
• Powering a desktop peripheral (printer, lamp or monitor accessory) via the CEE 7/3 socket
• Creating a compact charging point on a desk, workstation or meeting table

When it may not be suitable

This unit provides only a single mains socket and one USB‑C port, so it is not intended to replace multi‑outlet power strips where several mains devices must be connected simultaneously. For heavy loads or multiple high‑power devices connected at the same time, a higher capacity power distribution solution with more outlets and longer cable options would be more appropriate.

Key specifications

• Socket type: single grounded CEE 7/3 mains outlet
• USB port: USB‑C Power Delivery, 45W maximum output
• Cable length: 0.2 metres (integrated mains connector cable)
• Intended use: desktop / small workspace power accessory

How to use

Plug the integrated mains connector into an appropriate wall outlet or desk power module, then connect your device to the CEE 7/3 socket or the USB‑C PD port as required. For laptop charging, use a compatible USB‑C cable and verify that your device supports PD charging at the available power level. Place the unit on or near the desk surface, keeping the short cable tidy and avoiding strain on connections. Unplug during extended periods of non‑use or when performing maintenance on connected equipment.

What to consider before purchase

• Confirm your laptop or device supports USB‑C Power Delivery and that 45W is sufficient for charging
• Ensure a single mains outlet meets your needs, or consider a multi‑outlet power strip if more sockets are required
• Check that the short 0.2 m cable length and integrated connector fit your intended placement and access to a wall outlet

Recommendations

Use a certified USB‑C cable rated for PD charging, avoid overloading the single mains outlet, and position the unit to prevent bending or tension on the short cable. For continuous high‑power use, monitor device temperature and follow manufacturer guidance for safe charging.