Resina para impressão 3D Flashforge 3D Resin UV/LCD Standard White 0,5 L 405 nm

Flashforge 3D Resin UV/LCD Standard White 0.5 L is a photopolymer formulated for 405 nm UV/LCD desktop 3D printers. Supplied in standard white, this 0.5-litre resin is intended for general-purpose printing and provides consistent curing at the specified wavelength for accurate layer definition and smooth surface finish suitable for prototypes, scale models and detailed parts.

Advantages

The resin cures reliably at 405 nm, delivering stable dimensional accuracy and fine detail resolution. Its standard white colour offers good contrast for post-processing and painting, and the formulation is optimised for typical desktop UV/LCD workflows to ensure repeatable prints and smooth surfaces.

Suitable for

• Rapid prototyping and concept models
• Detailed miniatures and figurines
• Functional prototypes and demonstration parts
• Scale models and architectural mock-ups

Key specifications

• Brand: Flashforge
• Model / MPN: 20001866001
• EAN: 6971940404903
• Volume: 0.5 L
• Material type: Photopolymer resin for UV/LCD printing
• Recommended wavelength: 405 nm
• Colour: Standard white

How to use

Shake or gently stir the bottle before use to ensure homogeneity. Pour the required amount into the printer vat following your printer manufacturer’s instructions. Set exposure parameters (layer time, lift speed) according to your printer profile for 405 nm resins and the chosen layer thickness. After printing, rinse printed parts in isopropyl alcohol or another recommended solvent, then post-cure under a compatible 405 nm UV source to reach final mechanical properties.

Recommendations

Use appropriate personal protective equipment (nitrile gloves, eye protection) and work in a well-ventilated area. Store the resin in a cool, dark place away from direct sunlight and heat sources. Follow local regulations for disposal of uncured resin and contaminated solvents.