Robô aspirador EZVIZ CS-RE4P

The EZVIZ CS-RE4P robot vacuum combines sweeping, vacuuming and wet mopping in a compact round design. Equipped with LDS LiDAR navigation and a self-developed mapping system, it plans efficient cleaning routes and adapts to changes via the EZVIZ App. The unit uses a 4.35 L total dust capacity (0.35 L on the robot and a 4 L base dust bag) to reduce the need for frequent emptying, and runs up to 240 minutes on its 4930 mAh lithium-ion battery.

Advantages

The RE4 Plus offers long autonomous operation and simplified maintenance by collecting debris into a 4 L dust bag that can be replaced about every 90 days. It combines strong suction with automatic carpet boost and adjustable mop water flow for consistent floor cleaning. LDS LiDAR and infrared detectors enable accurate obstacle avoidance and room mapping, while the EZVIZ App provides floor plan customization and scheduling.

Suitable for

• Daily cleaning of apartments and houses with mixed hard floors and carpets
• Homes with pets and regular hair or dust accumulation
• Users who prefer low-maintenance cleaning with periodic dust bag replacement

Key specifications

• Model: EZVIZ CS-RE4P (CS-RE4P-TWT2)
• Total dust capacity: 4.35 L (robot 0.35 L + base 4 L dust bag)
• Battery: 4930 mAh lithium-ion, up to 240 min runtime
• Wet mopping: Yes; clean water tank 300 ml
• Navigation: LDS LiDAR and infrared detectors
• Height × Width: 95 mm × 345 mm
• Colour: White

How to use

Place the charging base on a flat surface and ensure the area around it is clear. Install a dust bag in the base according to the user manual, charge the robot, and use the EZVIZ App to run initial mapping of your home. Set cleaning schedules, define rooms or no-go zones in the app, and select mop water level as needed. After cleaning sessions, replace the 4 L dust bag when full — typically every 90 days depending on use — and refill the robot's 300 ml water tank for mopping tasks.

Recommendations

For best results, remove loose cords and small objects from floors before a cleaning run, keep the base accessible, and check the robot’s brushes and filters periodically. Replace the base dust bag every 60–90 days or sooner in high-debris environments and use the EZVIZ App to adjust suction and water levels for different floor types.