Robô de limpeza de piscina Wybot A1 — robô limpa-piscinas sem fios com navegação inteligente

Wybot A1 wireless pool cleaning robot is a compact autonomous cleaner designed for routine and seasonal maintenance of residential pools. The device combines dual drive, smart navigation and a two-layer filtration system to remove sand, leaves, hair and other common debris from pool floors and edges. It operates wirelessly and is suitable for a variety of pool shapes and surfaces.

Advantages

The Wybot A1 delivers up to 120 minutes of continuous cleaning on a single charge and can cover pools up to about 100 m² regardless of shape. The robot features WINS Edge Cleaning for thorough edge contact, a two-level 180 µm filtration system for fine particle capture, intuitive one-button controls with LED status indicators, and a lightweight compact housing that is easy to remove from water. It supports pools up to 3 m deep, has IPX8 water resistance and reduces the need for chemical treatment by efficiently removing debris.

Suitable for

• Residential in-ground and above-ground pools up to 100 m²
• Pools with vinyl, ceramic, mosaic, fiberglass, polyethylene and cement surfaces
• Routine cleaning of sand, leaves, hair, small pebbles and dust

Key specifications

• Manufacturer: Wybot
• Model: A1
• Recommended pool area: 80–100 m²
• Working depth: 0.6–3.0 m
• Dimensions: 345 × 315 × 170 mm
• Weight: 3.5 kg
• Operating time: 120 minutes
• Charging time: 2.5 hours
• Battery: 22.2 V, 2600 mAh
• Power: 33 W
• Charger input: 100–240 V, 50–60 Hz
• Charger output: 25.2 V / 1 A
• Filter: Two-level filtration, 180 µm
• Flow rate: 8.1 m³/h
• Movement speed: 16 m/min
• Water resistance: IPX8

How to use

Place the Wybot A1 into the pool and use the one-button control to start the selected cleaning cycle. The robot will navigate the pool surface using its dual drive and smart edge routine; LED indicators display battery level, operating status and chosen mode. After the cycle completes, remove the robot from the water, open the filter compartment and rinse the filters. In heavily soiled pools clean the filter more frequently during operation.

Recommendations

For best results, pre-rake large debris from the pool, run the Wybot A1 on a full charge for up to 120 minutes to cover the area, and rinse the two-layer filter after each use or every 30 minutes in very dirty conditions. Store the charger and robot in a dry shaded place and follow the user manual for maintenance and safety instructions.