Router exterior sem fios TP-Link Archer NX200-Outdoor dual-band Wi‑Fi 6 (802.11ax) 1201 Mbit/s, 2.5 Gigabit Ethernet, 5G, IP66, PoE, branco

TP-Link ARCHER NX200-OUTDOOR is an outdoor 5G AX1800 Wi‑Fi 6 router designed for rack or wall mounting. It supports dual‑band Wi‑Fi (2.4 GHz and 5 GHz) with a combined maximum physical rate up to 1201 Mbit/s on Wi‑Fi 6 (802.11ax) and includes a 2.5 Gigabit Ethernet interface. The unit is IP66 rated for dust and water protection and can be powered via PoE for flexible outdoor installation.

Advantages

The router provides modern Wi‑Fi 6 performance on both 2.4 GHz and 5 GHz bands and supports 5G mobile network connectivity, enabling high‑speed internet access where wired backhaul is unavailable. Its 2.5 Gigabit Ethernet port offers faster wired throughput than standard Gigabit ports, and the IP66 enclosure helps protect the device from dust and rain when installed outdoors following the manual.

Suitable for

• Outdoor wireless coverage for small businesses, cafes, and public spaces
• Locations requiring 5G as primary or backup WAN connectivity
• Installations needing PoE power and wall or rack mounting

When it may not be suitable

This device is not intended for prolonged immersion in water or exposure to high‑pressure water jets despite its IP66 rating. Wireless throughput, coverage, and the number of supported clients depend on environmental conditions, building materials, and client device capabilities, so expected performance may be lower in dense or obstructed environments.

Key specifications

• Wi‑Fi standard: Wi‑Fi 6 (IEEE 802.11ax)
• Wireless bands: Dual‑band 2.4 GHz and 5 GHz
• Maximum WLAN physical rate: up to 1201 Mbit/s
• WAN/LAN interface: 2.5 Gigabit Ethernet
• Mobile network: 5G support (actual bands and speeds depend on region and network)
• Ingress protection: IP66 (dustproof and water resistant)
• Power: Power over Ethernet (PoE)
• Mounting: Rack or wall mountable

How to use

Install the ARCHER NX200‑OUTDOOR on a suitable wall or rack mount following the supplied manual to ensure correct sealing and orientation. Provide power via a compatible PoE injector or switch and connect the Ethernet WAN or a 5G SIM/antenna as required by your deployment. Configure network settings through the TP‑Link management interface and verify firmware compatibility if integrating with other EasyMesh devices or vendor equipment.

What to consider before purchase

• Verify local 5G network coverage, supported frequency bands, and your mobile data plan
• Confirm PoE availability and that cabling supports 2.5 Gbit/s where higher wired throughput is required
• Assess installation site for mounting, exposure to weather, and potential obstructions affecting wireless coverage

Recommendations

For reliable outdoor operation, follow the installation instructions closely, keep firmware updated to resolve compatibility issues (for example with EasyMesh or MLO features), and plan device placement to minimise obstructions and interference.