SECOMP STANDARD Cabo adaptador VGA + Áudio para HDMI, 0,23 m, Preto S3211

Legacy VGA sources don't have to be left behind when upgrading to modern HDMI displays. The SECOMP STANDARD S3211 adapter cable bridges that gap by converting an analog VGA signal and a 3.5 mm stereo audio feed into a single digital HDMI output. Unlike passive VGA-to-HDMI cables that fail without active conversion, this compact adapter handles the signal processing internally, ensuring compatibility with laptops, desktops, and other VGA-equipped devices. Its short 0.23 m length keeps the setup tidy while delivering Full HD 1080p video at 60 Hz, making it a practical tool for presentations, home offices, or legacy media players.

Highlights

• Active VGA + 3.5 mm audio to HDMI conversion
• Supports resolutions up to 1920 x 1080 (1080p) at 60 Hz
• Integrated USB-A power cable for reliable operation
• Plug-and-play – no drivers or software required
• Compact 0.23 m cable reduces clutter
• Black housing blends with most equipment

In daily use

Connect the VGA and 3.5 mm audio cables from your source device, plug the USB-A connector into a free USB port or charger for power, and attach the HDMI end to your monitor, TV, or projector. The adapter automatically negotiates the signal, so you can start presenting or streaming without configuration. Because it draws power over USB, it works with devices that lack a dedicated power supply, and the short cable length keeps the adapter close to the source for a clean installation. Note that HDCP-protected content is not supported, so it is best suited for standard computer video and audio.

Full specifications

• Product type: VGA to HDMI converter cable with audio
• Input connectors: 1x VGA (HD-15), 1x 3.5 mm audio jack, 1x USB-A (power)
• Output connector: 1x HDMI (Type A)
• Cable length: 0.23 m
• Maximum resolution: 1920 x 1080 (Full HD 1080p) @ 60 Hz
• Audio input: 3.5 mm stereo analog
• Audio output: integrated into HDMI digital stream
• Power requirement: USB 5 V DC via integrated USB-A cable
• HDCP support: No
• Colour: Black
• Plug & Play: Yes
• Conversion direction: VGA + Audio (input) to HDMI (output)
• Supported video modes: PC VGA resolutions up to 1080p
• Application: connects legacy VGA devices to modern HDMI displays

Final note

A straightforward solution for keeping older VGA hardware in service with today's HDMI displays, without the bulk of a separate converter box.